Mark this thread as Sold
DFW,TX: REFERRAL BONUS! built engines (p.11), Okadas, turbo kits, garrett, precision, block off plate, completely built head, carbon fiber hood, hood vent trim, ap2 yellow wing (5/26)
#1
Registered User
Thread Starter
DFW,TX: REFERRAL BONUS! built engines (p.11), Okadas, turbo kits, garrett, precision, block off plate, completely built head, carbon fiber hood, hood vent trim, ap2 yellow wing (5/26)
Now offering referral bonus: If you refer someone who buys something for over 2k, I will give you $ 200, or you can have$ 300 off anything I am selling.
Partial turbo kit:
Revhard manifold, 0 mile freshly rebuilt precision sc61, fantastic condition inlinepro 600 intercooler (with mounting brackets), inlinepro bead rolled intercooler piping (has spot for ap2/06+ iat sensor), extra piping, tapped oil pan (will deduct/refund $100 if you send me a non-tapped, good condition oil pan) $2,200
can include with a worse condition inlinepro 600hp intercooler if you want to save money (-$200.
Can include a kpro with all parts if you want (extra of course)
Also have an aem map sensor/SOS 3 bar map sensor, and I'm sure other parts, that I can throw in. I need to catalog/group another turbo kit I don't need first.
For an extra $ 200 I will throw in cc stage 4 clutch, their lightweight flywheel and a walbro fuel pump.
A CC stage 2 may also be an option, if I feel like taking it out of the car it is in.
ap2 yellow rear wing, perfect condition $400 shipped obo
aluminum hood vent trim set
i had these made so that the vents would look cleaner. I tried the door trim stuff, but it looked ghetto. maybe the turbo heat caused that to contract and left gaps everywhere. I have an extra set of the 3, as well as the 2. The 3 are a little smaller than the 2. You can use these as guides to cut your hood. the extra sets I have are in raw, unpainted aluminum, and will come with the screws so that they will securely attach to your hood.
I am selling the set of 3 for $70 shipped, set of 2 for $55 shipped.
Have a couple more turbos FS.
Garrett p-trim, t4. .82 A/R. The reliability that has been a trademark of the Garrett name, since time immemorial. Made the numbers in my sig. Good for 600whp, but I'm going for more. Also known as a 60-1.
It has the vband downpipe option.
I am asking $500.
Fits VERY well (it isn't latched in the pictures. $400 OBO. MSRP is over $600, so you are saving over $200, shipping costs, and you don't have the clearcoat that will quickly go bad. (shipping via Greyhound. additional $50)
Aluminum EGR blockoff plate $11.
Amber USDM diffusers ($30 shipped)
Intake mani, ~70k miles ($60)
Fuel rail, ~70k miles ($20)
EGR, ~70k miles ($80)
EPS module, working perfectly ($120 shipped)
AC compressor, 30k miles, ($120 shipped OBO)
TSW Revo's, Not sure about specs, I think 17x8 ~+50, all the way around. I staggered tire sizes on them. $450 shipped OBO
Collection of my other heads:
The middle head is an Alaniz built head, that is either 90% similar or an exact replica of a head that Sideways used to run. It is fully built with supertech parts, ported and polished, and should provide 12-15% power increase for FI people. $1400 obo shipped and insured.
Definitely open to offers, and can do discounts if you buy more than one item.
If you find better deals, let me know and see if I will beat it
If something is priced too high, let me know.
I have lots of extra pieces, bolts, nuts, etc. If you need them, let me know and I can throw them in with something you buy.
Thanks!
Partial turbo kit:
Revhard manifold, 0 mile freshly rebuilt precision sc61, fantastic condition inlinepro 600 intercooler (with mounting brackets), inlinepro bead rolled intercooler piping (has spot for ap2/06+ iat sensor), extra piping, tapped oil pan (will deduct/refund $100 if you send me a non-tapped, good condition oil pan) $2,200
can include with a worse condition inlinepro 600hp intercooler if you want to save money (-$200.
Can include a kpro with all parts if you want (extra of course)
Also have an aem map sensor/SOS 3 bar map sensor, and I'm sure other parts, that I can throw in. I need to catalog/group another turbo kit I don't need first.
For an extra $ 200 I will throw in cc stage 4 clutch, their lightweight flywheel and a walbro fuel pump.
A CC stage 2 may also be an option, if I feel like taking it out of the car it is in.
ap2 yellow rear wing, perfect condition $400 shipped obo
aluminum hood vent trim set
i had these made so that the vents would look cleaner. I tried the door trim stuff, but it looked ghetto. maybe the turbo heat caused that to contract and left gaps everywhere. I have an extra set of the 3, as well as the 2. The 3 are a little smaller than the 2. You can use these as guides to cut your hood. the extra sets I have are in raw, unpainted aluminum, and will come with the screws so that they will securely attach to your hood.
I am selling the set of 3 for $70 shipped, set of 2 for $55 shipped.
Have a couple more turbos FS.
Garrett p-trim, t4. .82 A/R. The reliability that has been a trademark of the Garrett name, since time immemorial. Made the numbers in my sig. Good for 600whp, but I'm going for more. Also known as a 60-1.
It has the vband downpipe option.
I am asking $500.
Fits VERY well (it isn't latched in the pictures. $400 OBO. MSRP is over $600, so you are saving over $200, shipping costs, and you don't have the clearcoat that will quickly go bad. (shipping via Greyhound. additional $50)
Aluminum EGR blockoff plate $11.
Amber USDM diffusers ($30 shipped)
Intake mani, ~70k miles ($60)
Fuel rail, ~70k miles ($20)
EGR, ~70k miles ($80)
EPS module, working perfectly ($120 shipped)
AC compressor, 30k miles, ($120 shipped OBO)
TSW Revo's, Not sure about specs, I think 17x8 ~+50, all the way around. I staggered tire sizes on them. $450 shipped OBO
Collection of my other heads:
The middle head is an Alaniz built head, that is either 90% similar or an exact replica of a head that Sideways used to run. It is fully built with supertech parts, ported and polished, and should provide 12-15% power increase for FI people. $1400 obo shipped and insured.
Definitely open to offers, and can do discounts if you buy more than one item.
If you find better deals, let me know and see if I will beat it
If something is priced too high, let me know.
I have lots of extra pieces, bolts, nuts, etc. If you need them, let me know and I can throw them in with something you buy.
Thanks!