s2kJer

Finally got the V3 exhaust from Sir Mikey and hoping to install it tomorrow.
Anyone have a set of ramps or a jack/jackstands I could borrow for the day?

Also, anyone that has done an exhaust swap that can give me a hand would really be appreciated.
"beer and access to the pool will be provided"

I heard getting the stock exhaust off is a pain in the arse!

Thx in advance!

1FastS2k

Using lots of lube will help with the pain in he ass part. Seriously though use some wd40 for the bolts and hangers and it'll make your life a little easier.

OKSTWOK

I got ramps if needed.

skibum

Use some jack stands so you can take the rear wheels off. Makes it way easier to get to the muffler hangers. Also, a long screwdriver or pry bar will help slide the hangers off.

grocerystore_ninja

i would offer some help but i got to write a eng paper today

replica

I have jackstands. Ramps too, but they're only about 4" high to allow my big ass Sears floor jack to get in there. I'll be watching the Cards & Steelers all day, but I'll check back here before 10 and around 1 just in case you need them

S2KVITO

Its way easy I've switched my exhaust from stock to aftermarket like 8 times get ready to bench press that stock system if your doin the install alone lol, get some PB Blaster for the bolts and the rubber hangers

CodyLX450

is your friend.

dat boi

Its finished

s2kJer

Here are some pics of the finished product...! Sound is surprisingly deep and no drone yet..



Big thanks to Simmy, Robert, and everyone else that stopped by!
Would of been still sitting in my garage if it wasn't for you guys.