Need test car for AEM v2 ECU in LR
Thread Starter
Registered User
Joined: Sep 2009
Posts: 420
Likes: 0
Need test car for AEM v2 ECU in LR
Is there anyone in the Little Rock area with a 00-05 S2000 that will let me plug my AEM ECU 30-6052 in to see if it is my ECU that is messed up or wiring?
My problem is that I plug in my AEM ECU into my car and turn on switched power and my ECU reads the MAP and O2 sensors at 5.06 volts. when I disconnect the sensors it goes down by about .10 volts. I should be getting around ~1v.
Just need to disconnect your stock ECU, plug mine in, turn the key to sitch power on and check with my laptop to see what MAP volts you are getting.
My problem is that I plug in my AEM ECU into my car and turn on switched power and my ECU reads the MAP and O2 sensors at 5.06 volts. when I disconnect the sensors it goes down by about .10 volts. I should be getting around ~1v.
Just need to disconnect your stock ECU, plug mine in, turn the key to sitch power on and check with my laptop to see what MAP volts you are getting.
Thread
Thread Starter
Forum
Replies
Last Post