HRTS2k

has anyone changed thier HU and made it work with the controls. i have read about the Modifry stuff and others bout what about here in Aus or NZ

Vuey

if you change to an aftermarket deck you will loose the use of your dash controls . You will need to install a DCI to make it compatible.

JAPCAB

with my kenwood deck you can use the mute....no volume or mode changer though.

I believe some sony headunits support the volume, mode and mute button - otherwise yer DCI.

evangelo

i have the JVC AVX2 with a dci
full control of volume, mute, track selection, radio selection.
the dci in most cases wont get the mute working, as the button on the car latches on and off instead of just sending a signal when pressed
to get the mute working you will need any basic car relay

AusS2000

I don't know of any Sony units that support the dash controls without a DCI.

HRT, I have seen some PAC-SWI-Xs here but there is no point. Just order a DCI from Modifry. It'll get here in no time and is a much better unit.

It supports most head units, comes in either hard wired or IR has more functions than stock and even has speed dependent volume control.

AusS2000

Oh, and mute works beautifully with my Sony head unit and DCI.

replicah

Aus, can you tell me the paddle settings on your dci?

Mine's still faulty.. Bob said i could send it back.. but i've been doing a lovely bit of procrastination.. good times

AusS2000

You mean dipswitch?

It's been a long time. I'll see if I can have a look on the weekend.

krbz

i have a alpine HU, with IR modifry dci, all the buttons and functions work perfectly.

replicah

yeah, the 10 or so little switches on the dci...

just to confirm on the mex-r1 before i send her home to pappa bob.

thanks mate