Hydraulic S2000
04-10-2015, 04:22 PM
#1
Registered User
Thread Starter
Join Date: Sep 2013
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Hydraulic S2000
I bought my S2000 around 18Months ago. I have had quite a few problems since i bought it, but i eventually got i almost perfect. The day i bought the car, big end bearing went bang. So new engine. Then, bought a new clutch while i had it all out, competition clutch stage 2 i think. Had it all back in & running, then a week later the brand new release bearing breaks on me. Got that sorted & about 2 months later my left hand side drive messes up. It was the hardy spicer joint. IMPOSSIBLE TO GET A REPLACEMENT (in ireland anyway). Got a second hand drive shaft & fitted that, thats off balance. Eventually i got it all sorted & car is driving perfect now.
Inbetween all of these problems i was Refurbing a set of wheels, getting centres powder coated, lips polished & building them back up. I bought coilovers & fitted them, tried on my wheels for the first time & was not happy at all. Car sitting was way too high & that was at the lowest setting on the coilovers
So i took the coilovers out, sold them & went shopping for hydraulics.
Now from what i have searched so far, i dont believe any S2000 has been put on hydraulics before. I could be totally wrong. & im probably going to get abuse for doing this to the car. But i love it.
So, here is the finished product.
Inbetween all of these problems i was Refurbing a set of wheels, getting centres powder coated, lips polished & building them back up. I bought coilovers & fitted them, tried on my wheels for the first time & was not happy at all. Car sitting was way too high & that was at the lowest setting on the coilovers
So i took the coilovers out, sold them & went shopping for hydraulics.
Now from what i have searched so far, i dont believe any S2000 has been put on hydraulics before. I could be totally wrong. & im probably going to get abuse for doing this to the car. But i love it.
So, here is the finished product.
04-13-2015, 10:48 AM
#6
04-13-2015, 03:40 PM
#7
Registered User
Thread Starter
Join Date: Sep 2013
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
[/quote]
Positive, tried again just for you guys. Ill make sure to get i right next time.
Trending Topics
04-13-2015, 03:51 PM
#8
Registered User
Thread Starter
Join Date: Sep 2013
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
04-13-2015, 03:58 PM
#9
Originally Posted by Trustd_1' timestamp='1428949508' post='23576169
if you're gonna do it, do it right. need to dip front, back, side to side, & 3 wheel motion. #gohardorgohome #aintnohalfsteppin
have fun w/your car.
04-13-2015, 04:48 PM
#10
Registered User
Thread Starter
Join Date: Sep 2013
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mickyg1986' timestamp='1428969073' post='23576656
[quote name='Trustd_1' timestamp='1428949508' post='23576169']
if you're gonna do it, do it right. need to dip front, back, side to side, & 3 wheel motion. #gohardorgohome #aintnohalfsteppin
if you're gonna do it, do it right. need to dip front, back, side to side, & 3 wheel motion. #gohardorgohome #aintnohalfsteppin
have fun w/your car.
[/quote]
Cool story bro.
I will enjoy my car, thanks. ❤️