Automotive builds Got an automotive build you want to want to document? Post it here!

xAgyex's 00 S2K Thread

Thread Tools
 
Old Jun 16, 2014 | 10:58 AM
  #101  
xAgyex's Avatar
Thread Starter
10 Year Member
Photogenic
Photoriffic
 
Joined: Jul 2011
Posts: 490
Likes: 0
From: Baltimore, MD
Default

IPHONE 4 and 4s trip for back glass swap:

So picked up an iPhone 4s and the back glass was cracked. ON the right.


I had a spare iPhone 4 laying around, ON the left. So I descided rather than buy a new back glass for the iPhone 4s, I will use the iPhone 4 back glass.


As you can see the clips do not match exactly

So I cut the one highlighted with the green arrow below, and it fit, with a small gap by the mute button.



Its that easy folks. Hope someone uses this trick.
Reply
Old Jun 25, 2014 | 11:45 AM
  #102  
xAgyex's Avatar
Thread Starter
10 Year Member
Photogenic
Photoriffic
 
Joined: Jul 2011
Posts: 490
Likes: 0
From: Baltimore, MD
Default

PCA Autocross event #3 at BWI

[attachment=61596:50_50.jpg]

My runs from that day:
http://youtu.be/b9bkyAc1wwg

Tire Pressure Checks for this event:
Recommend and used for everyone: 35 psi front, 34 psi rear.
Attached Thumbnails xAgyex's 00 S2K  Thread-50_50.jpg  
Reply
Old Jul 21, 2014 | 06:15 AM
  #103  
xAgyex's Avatar
Thread Starter
10 Year Member
Photogenic
Photoriffic
 
Joined: Jul 2011
Posts: 490
Likes: 0
From: Baltimore, MD
Default

On June 13th, 2014 - I woke up to find that my S was hit. No note was left, thus had to call my insurance company to take care of it.
I was able to get the car back from the shop all fixed up by July 11th, 2014.

[attachment=63191:FenderFixedSmall.png]
Attached Thumbnails xAgyex's 00 S2K  Thread-fenderfixedsmall.png  
Reply
Old Jul 21, 2014 | 06:23 AM
  #104  
xAgyex's Avatar
Thread Starter
10 Year Member
Photogenic
Photoriffic
 
Joined: Jul 2011
Posts: 490
Likes: 0
From: Baltimore, MD
Default

PCA Autocross event #4 at BWI this past Saturday July 19th, 2014.

Started the day by breaking one of my wheel studs (Just the tip). Luckily my local shop was able to grind down the bad spots and I was able to get the lug on with no issue after that. Always good to know a local auto shop.

[attachment=63192:IMG_2974.JPG]

Note this weekend 32psi front and 29psi rear worked really well for me. FTD was 49 seconds and I did a best at 51 seconds. Again stock S2000, minus the wheels and k&n intake.

------------------------------------

Update 8/11/2014:
Results from the event...I placed top 10, I see a big improvement from my first event this year till now, so very happy.
[attachment=64427:PCA4.png]
Attached Thumbnails xAgyex's 00 S2K  Thread-img_2974.jpg   xAgyex's 00 S2K  Thread-pca4.png  
Reply
Old Aug 18, 2014 | 10:11 AM
  #105  
xAgyex's Avatar
Thread Starter
10 Year Member
Photogenic
Photoriffic
 
Joined: Jul 2011
Posts: 490
Likes: 0
From: Baltimore, MD
Default

PCA Autocross event #5 at BWI

[attachment=64862:IMG_3185111.JPG]

[attachment=64863:IMG_3204111.JPG]

My last run of the day (44.7 secs):
http://youtu.be/QiB-MStmcsY

Tire Pressure Checks for this event:
Recommend and used for everyone: 30 psi front, 29 psi rear hot.
Attached Thumbnails xAgyex's 00 S2K  Thread-img_3185111.jpg   xAgyex's 00 S2K  Thread-img_3204111.jpg  
Reply
Old Aug 29, 2014 | 01:43 PM
  #106  
xAgyex's Avatar
Thread Starter
10 Year Member
Photogenic
Photoriffic
 
Joined: Jul 2011
Posts: 490
Likes: 0
From: Baltimore, MD
Default

On Aug 27th, 2014, while leaving work, I noticed that someone had hit my bumper hard enough to remove paint.
Thankfully it is plastic, so I will buff it out and see. I have to play to get the whole car resprayed.

[attachment=65487:Bumper.JPG]
Attached Thumbnails xAgyex's 00 S2K  Thread-oilchangeaug2014.jpg   xAgyex's 00 S2K  Thread-bumper.jpg  
Reply
Old Aug 29, 2014 | 01:43 PM
  #107  
xAgyex's Avatar
Thread Starter
10 Year Member
Photogenic
Photoriffic
 
Joined: Jul 2011
Posts: 490
Likes: 0
From: Baltimore, MD
Default

Oil changed today Aug 29th, 2014

Mileage: 106,903
Next change at 109,903

[attachment=65486:OilChangeAug2014.JPG]

Also retouched the front lip.
Picked up the spray can paint from Amazon
Reply
Old Sep 13, 2014 | 08:07 AM
  #108  
xAgyex's Avatar
Thread Starter
10 Year Member
Photogenic
Photoriffic
 
Joined: Jul 2011
Posts: 490
Likes: 0
From: Baltimore, MD
Default

Replaced stock AP1 speakers with these Kenwood speakers

Kenwood KFC-1664S 6-1/2-Inch 3-Way Sport Series Coaxial Car Speakers
On Amazon

[attachment=66303:NewSpeakers.jpg]

The bass is not the best, but now I know what is installed in the car and it is wired up well. Used heat wrap.
Attached Thumbnails xAgyex's 00 S2K  Thread-newspeakers.jpg  
Reply
Old Sep 24, 2014 | 07:28 AM
  #109  
xAgyex's Avatar
Thread Starter
10 Year Member
Photogenic
Photoriffic
 
Joined: Jul 2011
Posts: 490
Likes: 0
From: Baltimore, MD
Default

Changed rear brake pads, as they were super low.

Used Akebono ProAct ACT537

[attachment=66896:IMG_3306.JPG]
Attached Thumbnails xAgyex's 00 S2K  Thread-img_3306.jpg  
Reply
Old Sep 24, 2014 | 07:40 AM
  #110  
xAgyex's Avatar
Thread Starter
10 Year Member
Photogenic
Photoriffic
 
Joined: Jul 2011
Posts: 490
Likes: 0
From: Baltimore, MD
Default

PCA Autocross event #6 at BWI

[attachment=66897:IMG_3301.JPG]

[attachment=66898:IMG_3304.JPG]

My best run of the day (44.?? secs):
[media]http://www.youtube.com/watch?v=fvDYDx0Zoo8[/media]

Tire Pressure Checks for this event:
Recommend and used for everyone: 26 psi front, 26 psi rear hot...bad idea
Attached Thumbnails xAgyex's 00 S2K  Thread-img_3301.jpg   xAgyex's 00 S2K  Thread-img_3304.jpg  
Reply



All times are GMT -8. The time now is 08:00 PM.