Mark this thread as Unsold
Power House AMUSE GT1 Widebody S2000 w/ ITB's
09-08-2008, 02:13 PM
#1
Registered User
Thread Starter
Join Date: Nov 2007
Location: SoCal
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Power House AMUSE GT1 Widebody S2000 w/ ITB's
Parts in GREEN are available to be purchase separately from the car!
It was going to happen sooner or later. The car was a complete blast to own and drive. One of the best cars I've ever own (up-to-date). As most of you know, its not stock, no where near stock - so, if you're looking for a stock-ish car, look elsewhere. I modified this car to my own liking and preference, if you don't like it, please refrain from making a comment. The majority of the receipts/documents will be provided to the next owner.
Some history about the car...I'm the 2nd owner. The first owner was my personal dentist. He's a 55 years-old gentlemen who owned the car for the first 4,8xx miles. The car currently has 18,5xx miles and have ALWAYS been garaged. I personally did all the oil, tranny, and diff fluid changes. Oil was changed every 2,500 miles, tranny was changed at 10,000 and diff fluid was changed at every 5,000 using Mobil 10W-30, Honda MTF, and Mobil 75W-90.
Year: 2005
Make: Honda
Model: S2000
Color: Silverstone Metallic
Mileage: 18,5xx
Title: Clean title!
More pictures can be found here.
Mods list:
Exterior
*Power House Amuse GT1 Widebody - $6,200
*Painted Silverstone & Body Work - $4,000
-GT1 Front Bumper
-GT1 Front Fenders (Extended 15mm)
-GT1 Sides Skirts
-GT1 Rear Quarter Panels (Extended 10mm)
-GT1 Rear Bumper
*OEM Hood w/ Cut-outs
*ITG CF Mirrors - $200
*Custom Piping w/ Apex-i Muffler Exhaust - $500
*OEM Vented Hood - FREE
Total = $10,900 ***Nothing will be parting out in this section.
-------------------------------------------
Interior
*Cusco/Safety21 6 Point Roll Cage w/ Harness Bar Painted Silverstone - $850
*Bride Brix II Leather Gradation Driver Seat w/ Type-RO Rail - $800
*Bride Gradation Door Panels - $200 + your AP2 black panels
*Takata Harness - $300
*Aspec Ti Shift Knob - $50 + your stock knob
*JDM Type-R Shift Boot - $40
Total = $2,960
-------------------------------------------
Engine
*TWM 52mm Individual Throttle Bodies - $1800
*TWM Fuel Rail - $120
*TWM Adjustable Fuel Pressure Regulator - $100
*AEM EMS w/ UEGO - $1750
*Tuning - $600
*ACT HD Performance Clutch w/ OEM Throwout Bearings - $550
*OEM AP2 Flywheel resurfaced - $20
*Installation - $350
*Bosch 440cc Injectors & Clips - $300
*Denso IK24 Iridium Spark Plugs - $80
***NOTE: If you don't want the internal mods, and just want the ITB setup, it'd be $3700. Which is all the parts above.
*Cometic 3mm Head Gasket - $180
*Hondata Intake Manifold Gasket - $50
*Skunk2 Titanium Retainers - $190
*Skunk2 Valve Springs - $250
*Toda Camshafts - $1100
*Toda Campulleys - $700
*Installation - $300
***NOTE: If you want the ITB setup AND the internal mods, price is $5000. In that case, I'd prefer to straight swap the motor/tranny with someone that has an AP2 (04-05) and similar mileage on their engine. It will be much easier and my mechanic can finish the swap in one day!
*ARC Radiator Cap - $30
*ARC Oil Cap - $110
*Mugen Fan Switch - $55
*Spoon Magnetic Drain Plugs - $50
*Motorklasse 4.44 Final Drive Gears w/ Installation - $900
*Superman Reservoir Covers - $10
Total = $9,595
-------------------------------------------
Suspension
*Volk TE37 Gunmetal 18x9.5 +12 & 18x10.5 +15 - $2800
*Kumho Ecsta MX 265/35/18 & 275/35/18 - $700
*Rays Lugs - Black - $120
*Tein RA Coilovers - $1400
*Tanabe F&R Sway Bars - $280
*Spoon Lower X-Brace - $210
*Spoon Rear Tie Bar - $130
Total = $5,740
-------------------------------------------
Total = $28,000+ in mods
-------------------------------------------
Taken from KBB's website:
Condition Value
Excellent - $23,040
Good - $21,865
Fair - $20,185
-------------------------------------------
Asking price = $37,000 OBO
Contact info: via PM or on my cell at 714-467-6956.
I WILL NOT part out anything at this moment (that might change later and will reflect on the price). Please, no joy rides/bullshit. Test drives will be ONLY given my me and you can be the passenger. When you buy the car, you can drive it all you want.
Please leave personal comments to yourself. 
It was going to happen sooner or later. The car was a complete blast to own and drive. One of the best cars I've ever own (up-to-date). As most of you know, its not stock, no where near stock - so, if you're looking for a stock-ish car, look elsewhere. I modified this car to my own liking and preference, if you don't like it, please refrain from making a comment. The majority of the receipts/documents will be provided to the next owner.
Some history about the car...I'm the 2nd owner. The first owner was my personal dentist. He's a 55 years-old gentlemen who owned the car for the first 4,8xx miles. The car currently has 18,5xx miles and have ALWAYS been garaged. I personally did all the oil, tranny, and diff fluid changes. Oil was changed every 2,500 miles, tranny was changed at 10,000 and diff fluid was changed at every 5,000 using Mobil 10W-30, Honda MTF, and Mobil 75W-90.
Year: 2005
Make: Honda
Model: S2000
Color: Silverstone Metallic
Mileage: 18,5xx
Title: Clean title!
More pictures can be found here.
Mods list:
Exterior
*Power House Amuse GT1 Widebody - $6,200
*Painted Silverstone & Body Work - $4,000
-GT1 Front Bumper
-GT1 Front Fenders (Extended 15mm)
-GT1 Sides Skirts
-GT1 Rear Quarter Panels (Extended 10mm)
-GT1 Rear Bumper
*OEM Hood w/ Cut-outs
*ITG CF Mirrors - $200
*Custom Piping w/ Apex-i Muffler Exhaust - $500
*OEM Vented Hood - FREE
Total = $10,900 ***Nothing will be parting out in this section.
-------------------------------------------
Interior
*Cusco/Safety21 6 Point Roll Cage w/ Harness Bar Painted Silverstone - $850
*Bride Brix II Leather Gradation Driver Seat w/ Type-RO Rail - $800
*Bride Gradation Door Panels - $200 + your AP2 black panels
*Takata Harness - $300
*Aspec Ti Shift Knob - $50 + your stock knob
*JDM Type-R Shift Boot - $40
Total = $2,960
-------------------------------------------
Engine
*TWM 52mm Individual Throttle Bodies - $1800
*TWM Fuel Rail - $120
*TWM Adjustable Fuel Pressure Regulator - $100
*AEM EMS w/ UEGO - $1750
*Tuning - $600
*ACT HD Performance Clutch w/ OEM Throwout Bearings - $550
*OEM AP2 Flywheel resurfaced - $20
*Installation - $350
*Bosch 440cc Injectors & Clips - $300
*Denso IK24 Iridium Spark Plugs - $80
***NOTE: If you don't want the internal mods, and just want the ITB setup, it'd be $3700. Which is all the parts above.
*Cometic 3mm Head Gasket - $180
*Hondata Intake Manifold Gasket - $50
*Skunk2 Titanium Retainers - $190
*Skunk2 Valve Springs - $250
*Toda Camshafts - $1100
*Toda Campulleys - $700
*Installation - $300
***NOTE: If you want the ITB setup AND the internal mods, price is $5000. In that case, I'd prefer to straight swap the motor/tranny with someone that has an AP2 (04-05) and similar mileage on their engine. It will be much easier and my mechanic can finish the swap in one day!
*ARC Radiator Cap - $30
*ARC Oil Cap - $110
*Mugen Fan Switch - $55
*Spoon Magnetic Drain Plugs - $50
*Motorklasse 4.44 Final Drive Gears w/ Installation - $900
*Superman Reservoir Covers - $10
Total = $9,595
-------------------------------------------
Suspension
*Volk TE37 Gunmetal 18x9.5 +12 & 18x10.5 +15 - $2800
*Kumho Ecsta MX 265/35/18 & 275/35/18 - $700
*Rays Lugs - Black - $120
*Tein RA Coilovers - $1400
*Tanabe F&R Sway Bars - $280
*Spoon Lower X-Brace - $210
*Spoon Rear Tie Bar - $130
Total = $5,740
-------------------------------------------
Total = $28,000+ in mods
-------------------------------------------
Taken from KBB's website:
Condition Value
Excellent - $23,040
Good - $21,865
Fair - $20,185
-------------------------------------------
Asking price = $37,000 OBO
Contact info: via PM or on my cell at 714-467-6956.
I WILL NOT part out anything at this moment (that might change later and will reflect on the price). Please, no joy rides/bullshit. Test drives will be ONLY given my me and you can be the passenger. When you buy the car, you can drive it all you want.
Please leave personal comments to yourself.
09-09-2008, 06:01 PM
#3
Registered User
Join Date: Jan 2007
Location: socal
Posts: 9,077
Likes: 0
Received 0 Likes
on
0 Posts
Huy! I'm sad you're selling man, I saw it in the socal forums a while back too... It looked like it'd be a cool car to photograph - though I'm sure you have tons of shots of it
As for the Bay Area guys, if there is anything you want delivered (that will fit in my S) I'm coming home at the end of the month to photograph a wedding and could bring smaller items up if you want to donate to my gas fund
As for the Bay Area guys, if there is anything you want delivered (that will fit in my S) I'm coming home at the end of the month to photograph a wedding and could bring smaller items up if you want to donate to my gas fund
09-11-2008, 01:15 PM
#5
Registered User
Thread Starter
Join Date: Nov 2007
Location: SoCal
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CLUTCHNET,Sep 11 2008, 10:15 AM
do you still have the amuse kit?
is it molded to your car?
dose it have any cracks?
let me know so i can try to get it ship here next day air for sema!
is it molded to your car?
dose it have any cracks?
let me know so i can try to get it ship here next day air for sema!
2. Its not molded to the car, just bolted to the car just like any other bumpers, fenders, side skirts, etc...
3. No cracks anywhere on the car.
-Please give me a call on my cell at 714-467-6956 if you're serious about purchasing it for Sema.
-------
Thanks for the bumps!
