AutoConcierge: 2008 F430 Spyder
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: Bay Area
Posts: 17,670
Likes: 0
Received 0 Likes
on
0 Posts
AutoConcierge: 2008 F430 Spyder
This was basically a new car prep, hardly any miles on it. Just a quick one step, and some spot compounding took care of the work. And we topped her off JUST right..
Exterior:
CWG via Foam Cannon
Wheels/Wheel wells:
P&S Brake Buster
P&S EnviroClean
P&S Spray it Spray wax/detail spray
P&S Nat.Shine Tire Shine
Wheel Shmitt
Various brushes
Polishing:
M105 via Makita+orange pad on Convertible top cover (wet sanding scratches)
Ultrafina via Makita+blaack pad " "
Gloss-It One Step Machine Polish via Flex/Glazing pad for the rest of the car
Interior:
P&S Express Interior Cleaner
CG WMF
Gloss-it leather polish
LSP:
CG E-Zyme wax
Befores:
Unfortunately none . It was early morning and the sun was still behind the trees when we started washing/claying.
During (foam cannon):
After claying, only minor hologramming was showing. I couldn't get ANY pics of the slight micromaring as they only would show in the sun, and when I remembered to pull the camera back out, the owner had already pulled the car in. I got one good picture of the hologramming that was occurring, but the rest the silver hid from my camera flash, and the camera wouldn't pick up what the halogens were showing . Hologram:
Slight hologram above my finger:
Bob spot compounding the convertible cover with 3" pads. Never seen that on a rotary, right?! :
Staging the wax:
Afters:
As always, C/C Welcome!
Aaron
Exterior:
CWG via Foam Cannon
Wheels/Wheel wells:
P&S Brake Buster
P&S EnviroClean
P&S Spray it Spray wax/detail spray
P&S Nat.Shine Tire Shine
Wheel Shmitt
Various brushes
Polishing:
M105 via Makita+orange pad on Convertible top cover (wet sanding scratches)
Ultrafina via Makita+blaack pad " "
Gloss-It One Step Machine Polish via Flex/Glazing pad for the rest of the car
Interior:
P&S Express Interior Cleaner
CG WMF
Gloss-it leather polish
LSP:
CG E-Zyme wax
Befores:
Unfortunately none . It was early morning and the sun was still behind the trees when we started washing/claying.
During (foam cannon):
After claying, only minor hologramming was showing. I couldn't get ANY pics of the slight micromaring as they only would show in the sun, and when I remembered to pull the camera back out, the owner had already pulled the car in. I got one good picture of the hologramming that was occurring, but the rest the silver hid from my camera flash, and the camera wouldn't pick up what the halogens were showing . Hologram:
Slight hologram above my finger:
Bob spot compounding the convertible cover with 3" pads. Never seen that on a rotary, right?! :
Staging the wax:
Afters:
As always, C/C Welcome!
Aaron
Thread
Thread Starter
Forum
Replies
Last Post
espelirS2K
California - Bay Area S2000 Owners
6
08-22-2008 10:12 AM