pointa-b-c

Kinda need help with that. I pulled out the lining and try to reach the "scews" but couldn't find them. Thanks for any help.

Picturepro

I did my05 last month..

you dont neet to pull the black cap off

There is a small 9-11? mm nut that you crank on a couple times
I used a small 1/4" drive 4"extenstion, swivel and a 2" exenstion

no drivers side you do need to move the over flow

My lights took 6 turns and now is good... just lights up bumpers and sidewalks

if you are in So OC I'd help you

Sideways

All it takes is a long phillips screwdriver. No wrench or extensions to do it correctly.

Picturepro

Pointa...... has a AP2 and its different from AP1

I got the point and shoot camera out and took a picture

AP2 - 2004-2005 Needs a 8MM with swivel and extenstion
This is on the right head light

pointa-b-c

Thanks guys, you are all very helpful. I thought I am going to get pwn3d for being a n00b. I downloaded the service manuel, probably has to adjust them some more.