Big-Time Retrofit On My RZ350
#115
Thread Starter
Talked to the machine shop today. They still haven't started on the spacers for the handlebar clamps. [Friday will be 2 weeks since I dropped off the parts.]
I'm probably going with a gold or blue Rizoma front brake reservoir. I'll have to wait until the windscreen is mounted before deciding on an exact location.
I might get rid of the tube-style rear master cylinder, and get a small Rizoma reservoir, instead.
I'm probably going with a gold or blue Rizoma front brake reservoir. I'll have to wait until the windscreen is mounted before deciding on an exact location.
I might get rid of the tube-style rear master cylinder, and get a small Rizoma reservoir, instead.
#118
Thread Starter
Caliper trial fitting:
I had to pull out these spacers and install larger ones because the Brembo calipers don't fit over the larger '06 - '08 GSXR rotors.
I had to pull out these spacers and install larger ones because the Brembo calipers don't fit over the larger '06 - '08 GSXR rotors.
#119
Thread Starter
I got these from a dude named Borut in Slovenia:
One module is an electronic CDI, one is a Programmable CDI Control Module, and one is a Programmable Control Module for the Electronic Exhaust Valves.
With the handheld programmer below, I can map pretty much any ignition advance curve or power valve response.
One module is an electronic CDI, one is a Programmable CDI Control Module, and one is a Programmable Control Module for the Electronic Exhaust Valves.
With the handheld programmer below, I can map pretty much any ignition advance curve or power valve response.