Mark this thread as Sold
SOLD
#1
Registered User
Thread Starter
Join Date: Feb 2011
Location: Salisbury Maryland
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
SOLD
CAR HAS BEEN SOLD
Name: John Caleb
Price: 13,500 obo
Location: Salisbury, Maryland
Contact: PM, text or call
UPDATE: Car is available again due to a non paying ebay bidder.
For sale is my 2001 Honda S2000 with 38,300 miles. The car has never been in an accident, and I have the clear title in hand. I purchased the car from a seller in Arizona in January of 2011. The car is in excellent condition inside and out. There is a small scratch on the passenger side door, and some scratches on the front bumper. There are also small stress fracture cracks in the headlights. Please see pictures. The only thing the car needs is new tires. I decided to not replace the tires as I know the next owner will likely be buying new wheels for the car anyway.
The car has a fully built motor and supporting modifications that are intended for boost, though the car has never been turbo'd. The motor was assembled and installed by Science of Speed, and is tuned on Hondata Kpro. The car has been well maintained with Amsoil oils used in the engine, transmission, and differential. I have receipts for over $10k in modifications that I will happily show to interested buyers.
I have a Carfax report from 12/23/15 which I will share with you at your request
The modifications to the car are listed below.
• Fully built bottom end by ERL Performance Superdeck system with iron ductile sleeves
• JE custom pistons, molly coated, gas ports and 8.9 to 1 compression ratio
• APR head studs
• Fully built titanium Competition head from Alaniz Technologies, with a port matched intake manifold
• SOS big mouth throttle body
• 900cc Siesmens injectors
• SOS 3bar map sensor
• Walbro 255 fuel pump
• InlinePRO upgraded timing chain tensioner
• Comp stage 4 puck style clutch
• Tanabe lower temp thermostat
• Koyo aluminum radiator
• Battery relocated to the trunk in an aluminum battery box
• Addition security improvements
• The girdle has already been tapped prior to engine install for an oil return line. It currently sits with an A/N fitting and a cap.
Name: John Caleb
Price: 13,500 obo
Location: Salisbury, Maryland
Contact: PM, text or call
UPDATE: Car is available again due to a non paying ebay bidder.
For sale is my 2001 Honda S2000 with 38,300 miles. The car has never been in an accident, and I have the clear title in hand. I purchased the car from a seller in Arizona in January of 2011. The car is in excellent condition inside and out. There is a small scratch on the passenger side door, and some scratches on the front bumper. There are also small stress fracture cracks in the headlights. Please see pictures. The only thing the car needs is new tires. I decided to not replace the tires as I know the next owner will likely be buying new wheels for the car anyway.
The car has a fully built motor and supporting modifications that are intended for boost, though the car has never been turbo'd. The motor was assembled and installed by Science of Speed, and is tuned on Hondata Kpro. The car has been well maintained with Amsoil oils used in the engine, transmission, and differential. I have receipts for over $10k in modifications that I will happily show to interested buyers.
I have a Carfax report from 12/23/15 which I will share with you at your request
The modifications to the car are listed below.
• Fully built bottom end by ERL Performance Superdeck system with iron ductile sleeves
• JE custom pistons, molly coated, gas ports and 8.9 to 1 compression ratio
• APR head studs
• Fully built titanium Competition head from Alaniz Technologies, with a port matched intake manifold
• SOS big mouth throttle body
• 900cc Siesmens injectors
• SOS 3bar map sensor
• Walbro 255 fuel pump
• InlinePRO upgraded timing chain tensioner
• Comp stage 4 puck style clutch
• Tanabe lower temp thermostat
• Koyo aluminum radiator
• Battery relocated to the trunk in an aluminum battery box
• Addition security improvements
• The girdle has already been tapped prior to engine install for an oil return line. It currently sits with an A/N fitting and a cap.
#2
Registered User
Thread Starter
Join Date: Feb 2011
Location: Salisbury Maryland
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
img]https://www.s2ki.com/s2000/uploads/gallery/album_39686/gallery_119212_39686_2594588.jpg[/img]
ki.com/s2000/uploads/gallery/album_39686/gallery_119212_39686_457530.jpg[/img]
[img]http://www.s2
ki.com/s2000/uploads/gallery/album_39686/gallery_119212_39686_457530.jpg[/img]
[img]http://www.s2
#7
Registered User
Thread Starter
Join Date: Feb 2011
Location: Salisbury Maryland
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts