Del Val needs these
#104
Registered User
Thread Starter
Join Date: May 2007
Location: Saint Joseph's University
Posts: 1,346
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
Originally Posted by AssassinJN,Apr 9 2008, 07:41 AM
Yep I'll let you know the results. And it is just as you think, a perfectly clear sticker that you can print onto, so it should work well. I figured this would be a better way to do it for the wind blocker since it it small and there are a lot of little details that really make it work. With the sticker they will have a more rigidity and strength for easy of installation.
For a windshield we'd have to go with the vinyl.
Frank- I can only print as long as a regular piece of paper, so it wouldn't be able to stretch the whole bottom of the window. However if you are ok with it just spanning part then we could do something with that.
For a windshield we'd have to go with the vinyl.
Frank- I can only print as long as a regular piece of paper, so it wouldn't be able to stretch the whole bottom of the window. However if you are ok with it just spanning part then we could do something with that.
#106
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
Originally Posted by Jcox3,Apr 9 2008, 01:55 PM
is the original a vector graphic or jpg?
#108
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
So I was just out in the garage making a template for my print, when I realized that it's not going to work the way I want...
The wind blocker across the very bottom is 12.5" which is longer then a regular sheet of paper. The only alternative for this would be a 2 part printout, which I will be trying, but that makes it difficult to get a perfect lay with no seem in the middle...
The wind blocker across the very bottom is 12.5" which is longer then a regular sheet of paper. The only alternative for this would be a 2 part printout, which I will be trying, but that makes it difficult to get a perfect lay with no seem in the middle...
#109
Registered User
![](https://staticssl.ibsrv.net/autocomm/Content/S2Ki/milestonestars-10yr.png)
Join Date: Nov 2006
Location: Plymouth Meeting Pa
Posts: 6,903
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
Originally Posted by AssassinJN,Apr 9 2008, 03:42 PM
Both, but I am in the process of vectorizing the rest of it. Currently it's half and half exportable at about 7000x1000 pixels right now.
#110
Registered User
![](https://staticssl.ibsrv.net/autocomm/Content/S2Ki/milestonestars-10yr.png)
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
Originally Posted by AssassinJN,Apr 9 2008, 10:27 AM
Printer as in a person, or as in you can stick a t-shirt through your lexmark? ![thinker.gif](https://www.s2ki.com/forums/images/smilies/thinker.gif)
![thinker.gif](https://www.s2ki.com/forums/images/smilies/thinker.gif)