Wheel fitment and fender roll needed soon
#1
Registered User
Thread Starter
Join Date: Oct 2011
Location: Houston, TX
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Wheel fitment and fender roll needed soon
Hey guys, so I have these work s1's that i want to install in the coming weeks and I need to find someone who does wheel fitment. Theyre 18x9.5 +41 front and 18x10.5 +49 rear. As far as tires are concerned i want to run 245/35 front 255/35 rear. I want to install them and then worry about getting the car painted in the spring. Thanks!
[attachment=33096:IMG_0327.jpg]
[attachment=33096:IMG_0327.jpg]
#3
For wheels/offsets and tire sizes look in the Wheels and Tires section and start from here: https://www.s2ki.com/s2000/topic/342...fitment-guide/
Or check also on Racing and Competition forum since some of the guys there run pretty wide wheels on the front.
IMHO, this sizes and offsets will not fit without significant fender modification and you will have to max out the neg.camber, meaning even fender rolling may not help. But better ask this question on Wheels/Tires section, they will give more accurate answer.
Or check also on Racing and Competition forum since some of the guys there run pretty wide wheels on the front.
IMHO, this sizes and offsets will not fit without significant fender modification and you will have to max out the neg.camber, meaning even fender rolling may not help. But better ask this question on Wheels/Tires section, they will give more accurate answer.
#4
Registered User
Thread Starter
Join Date: Oct 2011
Location: Houston, TX
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Apologies, the question i meant to ask was if anyone knew of someone who does fender rolling in the area. I know what needs to be done to get them to fit, I just need someone or a shop who can do it and is pretty good at it.
#5
My thread. https://www.s2ki.com/s2000/topic/561...t__p__16323727
Thread
Thread Starter
Forum
Replies
Last Post
forust
Wheels and Tires
8
10-22-2015 10:21 PM