Mark this thread as Sold
Custom Turbo setup
Thread Starter
Registered User
Joined: Mar 2008
Posts: 1,327
Likes: 0
From: seminole, Fla
Custom Turbo setup
setup has been on my 08 CR for about 3500 miles and is perfect. Nothing wrong with the kit at all....I am going a different route with the car which does not require boost. I had the kit sold but deal fell through so its back up.
Kit is on my car at the moment, but I will be uninstalling next week.
This setup was built for super fast spool and ultimate drivability in the Florida heat. This is the reason I did a top mount style IC, so that there was nothing blocking the radiator/ac.
I had a custom intake/ram air setup built to ram air through the bottom of the IC from the front bumper. I dont have pictures of this at the moment but will post them when I have them.
This is about as complete a kit as you can get. This spools as fast as a Greddy kit but makes much more power. At 10psi I did 332whp and 225tq through the stock exhaust running off the scale rich. This should be capable of 350whp+ with a little more boost or a good 3" exhaust.
what your getting:
Air Research/Garrett Turbo t3/t04b vtrim .60/.63
Tial 38mm wastegate
Tial 50mm BOV
RevHard manifold
LHT custom 3" recirc Downpipe which mates to stock exhaust.
Custom Intercooler 3" thick.
Custom Polished Piping by LHT Performance
Greddy Oil filter relocation kit
Oil Feed and drain
All silicone connectors
RC 550cc injectors with plug and play clips
Custom ram air setup (brake duct mated to 3" alluminum piping)
all the pictures I have at the moment.
$3200 shipped. if using paypal add %3.
Kit is on my car at the moment, but I will be uninstalling next week.
This setup was built for super fast spool and ultimate drivability in the Florida heat. This is the reason I did a top mount style IC, so that there was nothing blocking the radiator/ac.
I had a custom intake/ram air setup built to ram air through the bottom of the IC from the front bumper. I dont have pictures of this at the moment but will post them when I have them.
This is about as complete a kit as you can get. This spools as fast as a Greddy kit but makes much more power. At 10psi I did 332whp and 225tq through the stock exhaust running off the scale rich. This should be capable of 350whp+ with a little more boost or a good 3" exhaust.
what your getting:
Air Research/Garrett Turbo t3/t04b vtrim .60/.63
Tial 38mm wastegate
Tial 50mm BOV
RevHard manifold
LHT custom 3" recirc Downpipe which mates to stock exhaust.
Custom Intercooler 3" thick.
Custom Polished Piping by LHT Performance
Greddy Oil filter relocation kit
Oil Feed and drain
All silicone connectors
RC 550cc injectors with plug and play clips
Custom ram air setup (brake duct mated to 3" alluminum piping)
all the pictures I have at the moment.
$3200 shipped. if using paypal add %3.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post