Mark this thread as Unsold
NY: FS: Garage Sale: Turbo part out!
#1
NY: FS: Garage Sale: Turbo part out!
First Name: Dan
Price: 4,000
Location: Lake George area, NY.
Contact: PM & Email (ninety6yenko@aol.com)
For sale is my custom turbo kit for a S2000. The kit uses an EFR7670 IWG 0.92 twin scroll turbo. It made consistent 480s with a 2.25" exhaust previously. It has since had a 3" exhaust installed, TurboSmart parts, higher boost pressure and smoother BC. Car made 550WHP at 18PSI on Pump 93. I do not know if the kit will work with OEM AC lines or non-wire tucked bays. I always had them relocated & wires tucked. I will ship at buyers expense. Paypal verified, I have done about a dozen transactions here, and have done over 100 on ClubRSX & 8thcivic combined under the same username.
TURBO KIT ------------------ 4,000
BorgWarner EFR7670 IWG turbo with EBC kit.
TurboSmart 2 port Wastegate with interchangeable springs for any PSi desired.
TurboSmart Kompact high PSI recirculation valve.
Quantum Race Works Sidewinder manifold.
Quantum Race Works 3" 2 piece down pipe.
Full Race 3" test pipe to be able to bolt a catback on with 3 bolt flange.
Quantum Race Works inter-cooler piping.
Full Race 750HP inter-cooler.
Quantum Race Works 4" pie cut intake with velocity stack & filter.
Turbo oil feed & return lines.
Turbo water feed & return lines & adapters for block.
Timing cover with a return bung welded.
Alloy Craft heater-core reposition bracket.
Alloyworks EPS/fuse box relocation bracket.
--------------------------------------------------
SUPPORTING MODS ---------------
Ramey Built 3" dual exhaust, uses Magnaflow mufflers - $500
Innovate Wideband MTX-L setup - $125
Innovate oil PSI/Temp MTX-D setup - $125
Speed Factory Omni 4 Bar MAP -SOLD
P-Tuning oil & vacuum distribution block with variety of fittings - SOLD
S2CarbonWorks AC line relocation kit - SOLD
Mishimoto Oil cooler kit, supplied hoses & custom for above relocation kit - SOLD
Radium fuel rail & install kit - SOLD
AEM Fuel pressure regulator -SOLD
ID 1K injectors - $375 - SOLD
Radium dual catch can kit for AP2 -SOLD
KPRO V4 & install hardware -SOLD
AP2 valve cover powdercoated black -SOLD
Hasport Billet motor mounts -SOLD
Hasport Billet diff mounts - SOLD
Radium Fuel surge tank with 400LPH E85 pump & install kit.SOLD
Custom Sidewinder turbo setup:
About 20kmi. Excellent condition, no cracks in any piping. T-Bolts on all connections. Turbo has zero shaft play in any direction. Turbo never saw anti-lag or rolling anti-lag.
Ramey Built exhaust:
3" dual exhaust. Does not have a resonator and uses straight through magnaflow mufflers. I was an immediate lean condition switching to this from a Invidia N1 on my turbo setup. Needed to add 7-8% fuel across the board. has a flat spot in it where it hangs low by the axle from bottoming out.
Innovate MTX-L, MTX-D & SOS Dual gauge pod:
Wideband gauge using Bosch 4.9 LSU sensor. About 10KMI, replaced an AEM EUGO failsafe. Oil Pressure & Temperature gauge. About 10KMI on it, replaced just an oil temperature gauge. Both work great
Gauge pod Comes with OEM A-Pillar mounted behind it. Free if both gauges above are purchased at asking price. Will also include wiring and the fuse blocks that tie into underdash fuse box.
Price: 4,000
Location: Lake George area, NY.
Contact: PM & Email (ninety6yenko@aol.com)
For sale is my custom turbo kit for a S2000. The kit uses an EFR7670 IWG 0.92 twin scroll turbo. It made consistent 480s with a 2.25" exhaust previously. It has since had a 3" exhaust installed, TurboSmart parts, higher boost pressure and smoother BC. Car made 550WHP at 18PSI on Pump 93. I do not know if the kit will work with OEM AC lines or non-wire tucked bays. I always had them relocated & wires tucked. I will ship at buyers expense. Paypal verified, I have done about a dozen transactions here, and have done over 100 on ClubRSX & 8thcivic combined under the same username.
TURBO KIT ------------------ 4,000
BorgWarner EFR7670 IWG turbo with EBC kit.
TurboSmart 2 port Wastegate with interchangeable springs for any PSi desired.
TurboSmart Kompact high PSI recirculation valve.
Quantum Race Works Sidewinder manifold.
Quantum Race Works 3" 2 piece down pipe.
Full Race 3" test pipe to be able to bolt a catback on with 3 bolt flange.
Quantum Race Works inter-cooler piping.
Full Race 750HP inter-cooler.
Quantum Race Works 4" pie cut intake with velocity stack & filter.
Turbo oil feed & return lines.
Turbo water feed & return lines & adapters for block.
Timing cover with a return bung welded.
Alloy Craft heater-core reposition bracket.
Alloyworks EPS/fuse box relocation bracket.
--------------------------------------------------
SUPPORTING MODS ---------------
Ramey Built 3" dual exhaust, uses Magnaflow mufflers - $500
Innovate Wideband MTX-L setup - $125
Innovate oil PSI/Temp MTX-D setup - $125
Custom Sidewinder turbo setup:
About 20kmi. Excellent condition, no cracks in any piping. T-Bolts on all connections. Turbo has zero shaft play in any direction. Turbo never saw anti-lag or rolling anti-lag.
Ramey Built exhaust:
3" dual exhaust. Does not have a resonator and uses straight through magnaflow mufflers. I was an immediate lean condition switching to this from a Invidia N1 on my turbo setup. Needed to add 7-8% fuel across the board. has a flat spot in it where it hangs low by the axle from bottoming out.
Innovate MTX-L, MTX-D & SOS Dual gauge pod:
Wideband gauge using Bosch 4.9 LSU sensor. About 10KMI, replaced an AEM EUGO failsafe. Oil Pressure & Temperature gauge. About 10KMI on it, replaced just an oil temperature gauge. Both work great
Gauge pod Comes with OEM A-Pillar mounted behind it. Free if both gauges above are purchased at asking price. Will also include wiring and the fuse blocks that tie into underdash fuse box.
Last edited by ninetysixyenko; 02-12-2019 at 08:21 AM.
Trending Topics
#9
This will change come Winter time and I began tearing it down.
#10
Everything is for sale now, part-out has begun and I began stripping the car today. Pictures of almost everything will be up tomorrow.