Official Aftermarket Header Discussion
09-13-2009, 12:49 PM
#725
Registered User
Originally Posted by Zoomie,Aug 18 2009, 03:00 PM
I can't find anyone who is selling the TODA
09-24-2009, 05:09 PM
#726
Former Sponsor
Join Date: Jan 2009
Posts: 3,733
Likes: 0
Received 0 Likes
on
0 Posts
heres a review on customer who bought the header,
from notoriouspig
It went from 195-201 just bolting the header on. About 30-45min in between the runs. we did 3-4 runs with each header all of them consistent. I had been driving the car all day in hot ass Az. At the end of the day I made 211 with a 03 ecu and vfacII and 279 on a 75 shot of spray
mods,-
Aem v2, 70mm test pipe, 70mm single exit ti-c. The comparison was just a straight header swap though. Made 6whp up top and power across the entire rpm band.
195 with stock header
201 untuned ( header bolted on)
211 tuned
I dyno'd my header today. It made good power all the way across the rpm band over the stock header. Dyno graphs will be available tomorrow. I did a back to back comparison at Locash racing in phoenix, Az. I literally changed the header on the dyno. The fitment is good. The stock donut does fit it and ground clearance is good. Overall im happy with my purchase.
from notoriouspig
It went from 195-201 just bolting the header on. About 30-45min in between the runs. we did 3-4 runs with each header all of them consistent. I had been driving the car all day in hot ass Az. At the end of the day I made 211 with a 03 ecu and vfacII and 279 on a 75 shot of spray
mods,-
Aem v2, 70mm test pipe, 70mm single exit ti-c. The comparison was just a straight header swap though. Made 6whp up top and power across the entire rpm band.
195 with stock header
201 untuned ( header bolted on)
211 tuned
I dyno'd my header today. It made good power all the way across the rpm band over the stock header. Dyno graphs will be available tomorrow. I did a back to back comparison at Locash racing in phoenix, Az. I literally changed the header on the dyno. The fitment is good. The stock donut does fit it and ground clearance is good. Overall im happy with my purchase.
09-24-2009, 05:16 PM
#728
Former Sponsor
Join Date: Jan 2009
Posts: 3,733
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Garrett_si,Sep 24 2009, 05:12 PM
which header is it?
private label mfg s2000 header
https://www.s2ki.com/forums/index.ph...f=186&t=707937
