After looking at some JDM stroker kits, Is there any one which allows the engine to rev safely to AP1 9000rpm.

Stroker kits available

• Spoon: 2.2Ltr - ??CR
• J's: 2.2Ltr - 11.9, 12.5 and 13 CR
• Feels: 2.3Ltr - ??CR
• Toda: 2.2Ltr - 12.1CR
• Toda: 2.4Ltr - 12.1CR

On a side note: Toda stroker kits are advertised as 12.7 on US sites and 12.1 on JDM sites

Are there any other US brands which allow 9000rpm while keeping the CR between 11.7 and 12.1

Thanks

 

Very good question ???. I have asked the similar question before & really didn't get the right answer. I also, have been wondering which stroker kit will work the best.

 

All speculation since no one has really used any of these kits. That's why you don't get a real answer.

 

Comptech has one in the works.

 

If you are not set on revs(which really do not count for anything unless you want fun/bragging rights) you can get the Inline pro 2.5 stroker.

 

im somewhat in the same boat as you are, when the time comes to get a new engine, i will not go F/I but rather i think i will get either a tuners engine or an OE 2.2 from honda, i plan on keeping the s2k for a long time and i think i will get a c32/c55 amg for my daily when the time comes and keep the s2k for a long time. i just wish i got my s2k in white because in black its not going to stay as perfect as i want it to be. if anyone has any more info on engines i would love to listen also. thanks
CHRIS.

 

they will no relese the kit until mid year, the previuos kit that they were developing, 2.4L has a lot of issues, TSX Crank.


Joe Alaniz has a crank design that allows to spun up to 9.000, but here is always very busy.


Inline Pro make one 2.5L... but I do not reccomend it if you do not live in US. The are other shops who are working in stroker kits, I would go with a US stroker it moe easy to know all the details of the kit and it is cheapper

THere some one who trying using a F22C block and 00-01 ECU, but once agian it have not done to many miles and does not tacked the car, I assune that you want to track the car.


Juan

 

Interesting, I didn't know toda made a 2.4 liter stroker ? Some guy had his block stroke out with a inline pro 2.5 liter. He made I believe 250rwhp and 170lbs of torque. But I heard bad things about inline pro about their products.

 

The safely 9000rpm on a 2.2ltr is little far fetched IMO.

 

Here is the link to Toda
http://www.toda-racing.jp/new/0510VTEC_ad_S2000E.pdf