Mark this thread as Unsold
Canada - Garage Summer Sale 2019 - OEM and Aftermarket stuff
#1
Canada - Garage Sale 2019 - Pfab mani, FPIK, Spoon coilovers, OEM
Canada - Willing to Ship worldwide - always willing to work out a reasonable shipping method/cost
Payment - Paypal or Etransfer ( canada ) All prices in USD
Willing to trade plus minus cash for Engine Management or Hardtop - Aem EMS v1 v2 or infinity, OR Mugen replica hardtop
Some Interesting Stuff
Spoon Tuned Showa adjustable Coilover shocks -500 (retails 2750USD)
- Rare, solid upgrade over oem shocks. Ride height and dampening adjustable
- good condition, nothing leaking, nothing blown. Videos of me testing the shocks available .
- around 20k KM
- no springs
- do research. solid rare set of oem quality coilovers
Custom Sub box - 100
- 8"
- Goes where the glove box goes, in between roll hoops
- got from someone as package deal, never personally used
- Also have the roll hoops - full assembly, all black
OEM Headrest Speakers - 250
- Good condition, all speakers work, comes with wires, rare item
- Painted black
Complete Roll Hoops Assembly - 300
Complete Black Rollhops - trim never disassembled, comes with both plastic trim and all the actual metal roll hoop assembly underneath
K&N Intake FPIK - 100 shipped
- freshly cleaned and oiled filter as per the K&N service kit procedure
- no heatsheild
ZG Rear Fender Flares - 100
- no damage, comes with lining,
PFAB turbo Manifold and Wastegate dumptube - retails 495 plus 150 for dumptuibe - asking 300 for both
- BRAND NEW, never mounted
- External dumtube ( 150$ value)
- Constructed of 304 thick wall Stainless Steel and thick quality flanges for long lasting performance. Dyno proven over 600+whp.
-Threaded turbine inlet and wastegate flange for easy installation.
-For use with TiAL 38mm
-AC compatable.
-Oil flter and battery relocation not neccessary.
-Limited Lifetime warranty against cracking.
Some more boring OEM Stuff
AP2 2007 ECU - 200
- Ap1 Throttle body - 100
- Ap1 Intake Manifold - 100
- AP2 Intake Manifold With DBW complete with sensors - 250
Ap2 Fuel Rail and Injectors - 300
Ap1 Vtec Solenoid - 100
Ap1 Starter - 150
Ap1 Belt Tensioner - 150
Ap1 Propeller Shaft (Driveshaft) - 200
GPW Passenger Door complete with window and side mirror - 400
- mint condition no scratches
Ap1 Tailights - 150
Ap1 spark plug covers - 40 each - one oem, one powdercoated white
Ap1 Springs - 100 for all 4
ap1 fuel rail, fuel pressure regulator and injectors - 300
Oem solenoid valve switch - make offer
Wiring Harness - 200
Denso Cruise control module - 80
Cruise control module - 150
Slave cylinder - 100
Water pump and pulley- 150
OEm Fuel pump - good working condition, removed when I went turbo - 50
I have many other parts, just inquire and ill let you know if I have it.
Payment - Paypal or Etransfer ( canada ) All prices in USD
Willing to trade plus minus cash for Engine Management or Hardtop - Aem EMS v1 v2 or infinity, OR Mugen replica hardtop
Some Interesting Stuff
Spoon Tuned Showa adjustable Coilover shocks -500 (retails 2750USD)
- Rare, solid upgrade over oem shocks. Ride height and dampening adjustable
- good condition, nothing leaking, nothing blown. Videos of me testing the shocks available .
- around 20k KM
- no springs
- do research. solid rare set of oem quality coilovers
Custom Sub box - 100
- 8"
- Goes where the glove box goes, in between roll hoops
- got from someone as package deal, never personally used
- Also have the roll hoops - full assembly, all black
OEM Headrest Speakers - 250
- Good condition, all speakers work, comes with wires, rare item
- Painted black
Complete Roll Hoops Assembly - 300
Complete Black Rollhops - trim never disassembled, comes with both plastic trim and all the actual metal roll hoop assembly underneath
K&N Intake FPIK - 100 shipped
- freshly cleaned and oiled filter as per the K&N service kit procedure
- no heatsheild
ZG Rear Fender Flares - 100
- no damage, comes with lining,
PFAB turbo Manifold and Wastegate dumptube - retails 495 plus 150 for dumptuibe - asking 300 for both
- BRAND NEW, never mounted
- External dumtube ( 150$ value)
- Constructed of 304 thick wall Stainless Steel and thick quality flanges for long lasting performance. Dyno proven over 600+whp.
-Threaded turbine inlet and wastegate flange for easy installation.
-For use with TiAL 38mm
-AC compatable.
-Oil flter and battery relocation not neccessary.
-Limited Lifetime warranty against cracking.
Some more boring OEM Stuff
AP2 2007 ECU - 200
- Ap1 Throttle body - 100
- Ap1 Intake Manifold - 100
- AP2 Intake Manifold With DBW complete with sensors - 250
Ap2 Fuel Rail and Injectors - 300
Ap1 Vtec Solenoid - 100
Ap1 Starter - 150
Ap1 Belt Tensioner - 150
Ap1 Propeller Shaft (Driveshaft) - 200
GPW Passenger Door complete with window and side mirror - 400
- mint condition no scratches
Ap1 Tailights - 150
Ap1 spark plug covers - 40 each - one oem, one powdercoated white
Ap1 Springs - 100 for all 4
ap1 fuel rail, fuel pressure regulator and injectors - 300
Oem solenoid valve switch - make offer
Wiring Harness - 200
Denso Cruise control module - 80
Cruise control module - 150
Slave cylinder - 100
Water pump and pulley- 150
OEm Fuel pump - good working condition, removed when I went turbo - 50
I have many other parts, just inquire and ill let you know if I have it.
Last edited by turtlepower; 02-16-2019 at 06:50 PM. Reason: update
Trending Topics
#8
[QUOTE=turtlepower;24490749]Toronto, Ontario - Willing to Ship worldwide - always willing to work out a reasonable shipping method/cost
Payment - Paypal or Etransfer ( canada ) All prices in USD
Contact - email turtlepower@live.ca (sometimes goes to junk) so please also PM me and or TEXT 1+647-697-9881
Willing to trade plus minus cash for Engine Management or Hardtop - Aem EMS v1 v2 or infinity, OR Mugen replica hardtop
Some Interesting Stuff
Spoon Tuned Showa adjustable Coilover shocks - 650 OBO OR trade for engine management - Greddy, AEM etc
- Rare, solid upgrade over oem shocks. Ride height and dampening adjustable
- good condition, nothing leaking, nothing blown. Videos of me testing the shocks available .
- around 20k KM
- no springs
Custom Sub box - 150
- 8"
- Goes where the glove box goes, in between roll hoops
- got from someone as package deal, never personally used
- Also have the roll hoops - full assembly, all black
OEM Headrest Speakers - 250
- Good condition, all speakers work, comes with wires, rare item
- Painted black
Complete Roll Hoops Assembly - 400
Complete Black Rollhops - trim never disassembled, comes with both plastic trim and all the actual metal roll hoop assembly underneath
K&N Intake FPIK - 120 shipped
- freshly cleaned and oiled filter as per the K&N service kit procedure
- no heatsheild
ZG Rear Fender Flares - 100
- no damage, comes with lining,
PFAB turbo Manifold and Wastegate dumptube - retails 495 plus 150 for dumptuibe - asking 350 for both
- BRAND NEW, never mounted
- External dumtube ( 150$ value)
- Constructed of 304 thick wall Stainless Steel and thick quality flanges for long lasting performance. Dyno proven over 600+whp.
-Threaded turbine inlet and wastegate flange for easy installation.
-For use with TiAL 38mm
-AC compatable.
-Oil flter and battery relocation not neccessary.
-Limited Lifetime warranty against cracking.
Some more boring OEM Stuff
AP2 2007 ECU - 200
- Ap1 Throttle body - 100
- Ap1 Intake Manifold - 100
- AP2 Intake Manifold With DBW complete with sensors - 250
Ap2 Fuel Rail and Injectors - 300
Ap1 Vtec Solenoid - 100
Ap1 Starter - 150
Ap1 Belt Tensioner - 150
Ap1 Propeller Shaft (Driveshaft) - 200
AP2 Steering Wheel - good condition, minor wear - 150
GPW Passenger Door complete with window - 400
- mint condition no scratches
Ap1 Tailights - 150
Ap1 spark plug covers - 40 each - one oem, one powdercoated white
Ap1 Springs - 100 for all 4
ap1 fuel rail, fuel pressure regulator and injectors - 300
Oem solenoid valve switch - make offer
Wiring Harness - 200
Denso Cruise control module - 80
Cruise control module - 150
Slave cylinder - 100
Water pump and pulley- 150
OEm Fuel pump - good working condition, removed when I went turbo - 50
I have many other parts, just inquire and ill let you know if I have it.
[QUOTE] do you have an oem intake for a 2006 s2000
Payment - Paypal or Etransfer ( canada ) All prices in USD
Contact - email turtlepower@live.ca (sometimes goes to junk) so please also PM me and or TEXT 1+647-697-9881
Willing to trade plus minus cash for Engine Management or Hardtop - Aem EMS v1 v2 or infinity, OR Mugen replica hardtop
Some Interesting Stuff
Spoon Tuned Showa adjustable Coilover shocks - 650 OBO OR trade for engine management - Greddy, AEM etc
- Rare, solid upgrade over oem shocks. Ride height and dampening adjustable
- good condition, nothing leaking, nothing blown. Videos of me testing the shocks available .
- around 20k KM
- no springs
Custom Sub box - 150
- 8"
- Goes where the glove box goes, in between roll hoops
- got from someone as package deal, never personally used
- Also have the roll hoops - full assembly, all black
OEM Headrest Speakers - 250
- Good condition, all speakers work, comes with wires, rare item
- Painted black
Complete Roll Hoops Assembly - 400
Complete Black Rollhops - trim never disassembled, comes with both plastic trim and all the actual metal roll hoop assembly underneath
K&N Intake FPIK - 120 shipped
- freshly cleaned and oiled filter as per the K&N service kit procedure
- no heatsheild
ZG Rear Fender Flares - 100
- no damage, comes with lining,
PFAB turbo Manifold and Wastegate dumptube - retails 495 plus 150 for dumptuibe - asking 350 for both
- BRAND NEW, never mounted
- External dumtube ( 150$ value)
- Constructed of 304 thick wall Stainless Steel and thick quality flanges for long lasting performance. Dyno proven over 600+whp.
-Threaded turbine inlet and wastegate flange for easy installation.
-For use with TiAL 38mm
-AC compatable.
-Oil flter and battery relocation not neccessary.
-Limited Lifetime warranty against cracking.
Some more boring OEM Stuff
AP2 2007 ECU - 200
- Ap1 Throttle body - 100
- Ap1 Intake Manifold - 100
- AP2 Intake Manifold With DBW complete with sensors - 250
Ap2 Fuel Rail and Injectors - 300
Ap1 Vtec Solenoid - 100
Ap1 Starter - 150
Ap1 Belt Tensioner - 150
Ap1 Propeller Shaft (Driveshaft) - 200
AP2 Steering Wheel - good condition, minor wear - 150
GPW Passenger Door complete with window - 400
- mint condition no scratches
Ap1 Tailights - 150
Ap1 spark plug covers - 40 each - one oem, one powdercoated white
Ap1 Springs - 100 for all 4
ap1 fuel rail, fuel pressure regulator and injectors - 300
Oem solenoid valve switch - make offer
Wiring Harness - 200
Denso Cruise control module - 80
Cruise control module - 150
Slave cylinder - 100
Water pump and pulley- 150
OEm Fuel pump - good working condition, removed when I went turbo - 50
I have many other parts, just inquire and ill let you know if I have it.
[QUOTE] do you have an oem intake for a 2006 s2000