When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Mike
Tampa Bay Area, Fl
PM call/text 941-650-61two1
Paypal, Cash,wire $2500 Shipped Price Lowered 07/07/17 $2200 shipped via FedEx
Brembo GT kit in custom yellow/black combo. Never tracked or autocrossed. I'm including an OEM set of rear calipers that were ground free of cast marks and coated with g2/ 2-part caliper paint and a set of rear Brembo cross drilled rotors. These were discontinued by Brembo and were the last set sold in N America. The brakes have less than 5k miles and we're purchased new by me. One of the front calipers has a small (pencil tip) size blemish that I filled in with a closely matching paint marker and it's barely noticeable. Front and rear pads with 90+% left are included. The rears are OEM Honda. The rear calipers could use a fresh coat of g2 but it isn't necessary since the blemishes aren't seen once mounted. Goodrich stainless steel brake lines included. Original boxes, instructions and parts sheet and packing. MSRP $2971 stock red/white color without rears or rotors
$2500 shipped $2200 Shipped
Last edited by CHILIBEANZ; 07-25-2017 at 08:41 AM.
Do you know if the fronts will fit under a 17x9 +63ish wheel? Haven't bought my wheels yet, but I'll be autocrossing in STR, so they'll definitely be 17x9, and around that offset. I guess I'll have about 0.25" less clearance than your +57 front wheels. Did you have more clearance than that to the calipers?
Last edited by Nate Tempest; 07-09-2017 at 11:56 PM.
Do you know if the fronts will fit under a 17x9 +63ish wheel? Haven't bought my wheels yet, but I'll be autocrossing in STR, so they'll definitely be 17x9, and around that offset. I guess I'll have about 0.25" less clearance than your +57 front wheels. Did you have more clearance than that to the calipers?
I'm not sure how much clearance there was but I sent the stoptech template to CCW before my wheels were built. I do know that the AP2 v1,2,3 wheels will fit with the brembo setup and a small spacer maybe ~15mm. Hope that helps.
Do you know if the fronts will fit under a 17x9 +63ish wheel? Haven't bought my wheels yet, but I'll be autocrossing in STR, so they'll definitely be 17x9, and around that offset. I guess I'll have about 0.25" less clearance than your +57 front wheels. Did you have more clearance than that to the calipers?
I have this BBK as well and the only +63 I've found that they fit under so far are the Kosei K8R. So mine are currently off the car for auto-x season. Great BBK though GLWS!
06-03-2017, 06:22 AM
FL BREMBO GT BBK w/ rear brake setup
will ship out of USA too
