Mark this thread as Sold
FS: OEM AP1 Flywheel, AP1/2 Taillight Parts, and misc. engine/body parts
#1
Thread Starter
FS: OEM AP1 Flywheel, AP1/2 Taillight Parts, and misc. engine/body parts
Hey Guys,
Have some parts for sale. All parts are located in Christiana, TN and all prices are shipped to the lower 48 states.
1. AP1 OEM flywheel. 80$
It will need to be resurfaced before installation but is straight with no chipped teeth or anything. Some very minor surface rust, but won't affect performance at all once resurfaced. (a wire brush or some steel wool would easily take it off) These flywheels are a good lightweight upgrade for AP2's New they sell for 250 plus shipping from Majestic.
2. AP1/2 Taillight Lenses. 150$ for the pair, or 90$ for one. Leftover from Taillight mod project. Fix your cracked AP1 or AP2 headlights instead of replacing them!
Drivers side has a slight chip in one edge of the plastic, but it is in an area that extends into the black housing and will be sealed in place and unseen. Does NOT affect the lens in any way. Other than that, both lenses are in excellent shape with no cracks.
3. AP1v2 (Chrome Ring) diffusers and corner diffusers. 90$ for both sides, or 60$ for one set. (Reverse/Turn, Brake, Corner)
Will get pics up for the rest of this stuff, but here's what else I have...
4. Solenoid Valve, Vacuum Tank, Check Valve (Air Pump System) 60K miles- 50$
5. Contactor Assembly/Relay (Air Pump System) 60K miles- 50$
6. Current/Electronic Control Sensor (Air Pump System) 60K miles- 50$
7. OEM Water Pump with Pulley (and bolts) 60K miles- 50$
8. Thermostat Case/Water Pump Housing- 50$
9. OEM Front Calipers, removed at 98K miles in perfect working condition for Spoon Caliper install. Painted black with caliper paint, but will either need touching up or repainting as tire shop nicked them in a few places. Not froze up and no torn seals. 150$ for the pair, or 90$ each.
10. OEM Oil Cooler with mounting bolt- 50$
11. OEM Rear View Mirror, chrome foil is peeling (good candidate for Spoon mirror overlay)- 20$
Have some parts for sale. All parts are located in Christiana, TN and all prices are shipped to the lower 48 states.
It will need to be resurfaced before installation but is straight with no chipped teeth or anything. Some very minor surface rust, but won't affect performance at all once resurfaced. (a wire brush or some steel wool would easily take it off) These flywheels are a good lightweight upgrade for AP2's New they sell for 250 plus shipping from Majestic.
Drivers side has a slight chip in one edge of the plastic, but it is in an area that extends into the black housing and will be sealed in place and unseen. Does NOT affect the lens in any way. Other than that, both lenses are in excellent shape with no cracks.
Will get pics up for the rest of this stuff, but here's what else I have...
4. Solenoid Valve, Vacuum Tank, Check Valve (Air Pump System) 60K miles- 50$
5. Contactor Assembly/Relay (Air Pump System) 60K miles- 50$
6. Current/Electronic Control Sensor (Air Pump System) 60K miles- 50$
7. OEM Water Pump with Pulley (and bolts) 60K miles- 50$
8. Thermostat Case/Water Pump Housing- 50$
9. OEM Front Calipers, removed at 98K miles in perfect working condition for Spoon Caliper install. Painted black with caliper paint, but will either need touching up or repainting as tire shop nicked them in a few places. Not froze up and no torn seals. 150$ for the pair, or 90$ each.
11. OEM Rear View Mirror, chrome foil is peeling (good candidate for Spoon mirror overlay)- 20$
#6
Thread Starter
All prices are OBO... make some offers.... Someone's gotta have a set of tails with cracked lenses or someone wanting to upgrade their faded AP1v1 tail diffusers to the AP1v2's.