Mark this thread as Sold
Houston tx FS HoustonNFR part out turbo kit and other parts, check it out!
#1
Houston tx FS HoustonNFR part out turbo kit and other parts, check it out!
On my mission to hit 800hp, my BC rod gave and shot out the block while doing pulls on the dyno. Now I'm parting out the car and going on in life. SOME prices are obo and include shipping, some are not. I Will have a good set of BC valve springs and retainers for sale once they are off. 3 good condition BC rods, 3 Arias 10:1 pistons that are .5 over and 12 good Supertech valves but until then let me know if your interested...
Vinh tran
Houston tx
Contact via pm or 2817302684
PayPal: vqtran87@yahoo.com
If you need pics or any information on the parts I have listed please ask.
The turbo kit SOLD
Stage 2 Inline pro sidewinder T4 turbo manifold
Inline pro 3 inch downpipe
S366 borgwarner(bullseye power upgrade)T4 turbo 91ar exhaust housing
Tail 44mm waste gate
Dump tube
All Vacume lines
Precision 750 intercooler
Modified Mase intercooler pipeings
T bolt clamps with cups
2x HKS SSQv3 blow off valves (sounds amazing)
Set of ID 2000 cc injectors 00-05 780 SOLD
When I bought brand new, barely used
Exedy hyper twin disk clutch. Some dyno pulls and 1000 miles SOLD
AEM EMS v2 00-05 SOLD
Oil filter relocation kit with cross member plate seen in pictures
-10 an lines and fittings included
SOLD
Brand new FullBlown 340 fuel pump SOLD
H11 FullBlown head studs 1000 miles 300.00
Full blown radiator hoses black.
Comes with temperature sensor flange SOLD
Ap1 fuel rail black. SOLD
Aem fuel pressure regulator SOLD
Arp exhaust manifolds SOLD
Ap1 oil pump 180.00 only 1000 miles on it( these things are expensive brand new)
Ap1 water pump 1000 miles on it 100.00
Ac relocation kit with brand new filter dryer SOLD
Oil catch can/over flow tank.
Comes with -10 an lines and fittings SOLD
Valve cover could also be purchased, let me know
Inline pro timing chain tensioner 1000 miles SOLD
http://www.inlinepro.com/s1/p-158-in...tensioner.aspx
Ap1 intake manifold powder coated black with blox 74mm billet throttle body.(port matched) 350.00
Billet Skunk 2 vtec solenoid black with oil pressure sensor block off and skunk 2 solenoid cap SOLD
Hondata 4 bar map sensor Sold
Mac boost solenoid sold
Good condition ap1 transmission, no grinds, no pop outs 450.00
Innovative motor/transmission mounts (black bushings) SOLD
My rod shot out the block and hit the driver side motor mount so it is damaged but 100% reusable.
K24 ignition coils great for turbo. 1000 miles 140.00
Timing chain cover with -10 an welded on for return line SOLD
Ac compressor 60.00
Brian Crower Dual Valve Springs and Titanium Retainers
SOLD
Vinh tran
Houston tx
Contact via pm or 2817302684
PayPal: vqtran87@yahoo.com
If you need pics or any information on the parts I have listed please ask.
The turbo kit SOLD
Stage 2 Inline pro sidewinder T4 turbo manifold
Inline pro 3 inch downpipe
S366 borgwarner(bullseye power upgrade)T4 turbo 91ar exhaust housing
Tail 44mm waste gate
Dump tube
All Vacume lines
Precision 750 intercooler
Modified Mase intercooler pipeings
T bolt clamps with cups
2x HKS SSQv3 blow off valves (sounds amazing)
Set of ID 2000 cc injectors 00-05 780 SOLD
When I bought brand new, barely used
Exedy hyper twin disk clutch. Some dyno pulls and 1000 miles SOLD
AEM EMS v2 00-05 SOLD
Oil filter relocation kit with cross member plate seen in pictures
-10 an lines and fittings included
SOLD
Brand new FullBlown 340 fuel pump SOLD
H11 FullBlown head studs 1000 miles 300.00
Full blown radiator hoses black.
Comes with temperature sensor flange SOLD
Ap1 fuel rail black. SOLD
Aem fuel pressure regulator SOLD
Arp exhaust manifolds SOLD
Ap1 oil pump 180.00 only 1000 miles on it( these things are expensive brand new)
Ap1 water pump 1000 miles on it 100.00
Ac relocation kit with brand new filter dryer SOLD
Oil catch can/over flow tank.
Comes with -10 an lines and fittings SOLD
Valve cover could also be purchased, let me know
Inline pro timing chain tensioner 1000 miles SOLD
http://www.inlinepro.com/s1/p-158-in...tensioner.aspx
Ap1 intake manifold powder coated black with blox 74mm billet throttle body.(port matched) 350.00
Billet Skunk 2 vtec solenoid black with oil pressure sensor block off and skunk 2 solenoid cap SOLD
Hondata 4 bar map sensor Sold
Mac boost solenoid sold
Good condition ap1 transmission, no grinds, no pop outs 450.00
Innovative motor/transmission mounts (black bushings) SOLD
My rod shot out the block and hit the driver side motor mount so it is damaged but 100% reusable.
K24 ignition coils great for turbo. 1000 miles 140.00
Timing chain cover with -10 an welded on for return line SOLD
Ac compressor 60.00
Brian Crower Dual Valve Springs and Titanium Retainers
SOLD