Mark this thread as Sold
Maybe FS: CDT MS-100 10" subwoofer in sealed box
#1
Registered User
Thread Starter
Join Date: Sep 2002
Location: CA.WA.[TX].VA
Posts: 2,657
Likes: 0
Received 0 Likes
on
0 Posts
I had this in my car for under a month with the gains turned *way* down so the sub wasn't abused internally and I mounted it facing down (with the tools taken out of course ) so the face of it isn't scratched either. The reason I'm selling is because I think I'm going to go bigger...or smaller...or something
Here's some specs on the sub:
Continuous power handling: 150w
Peak power handling: 250w
Frequency response: 25Hz-500Hz
Sensitivity: 90dB
Box volume: Sealed Airspace .45-.90 cubic feet
Mounting depth: 4"
Link to sub on CDT Audio site
Here's some specs on the box:
This picture was, of course, taken before carpet, 1.25" spacer, weatherstripping, and silicone were added.
0.75" MDF on top
0.5" MDF on sides
0.5" birch on bottom
1.25" MDF for spacer
Outside dimensions: 22" x 13" x 5"
Inside dimensions: 21" x 12" x 3.75"
Volume: Uh...don't have a calculator offhand... (21x12x3.75 + pi x 9.16^2) / 12^3
Mounting depth: 5.75" (including spacer)
Carpeted with charcoal carpet on top and sides (not bottom which you never see anyway )
All joints sealed with wood adhesive during building and then sealed again with silicone after building
0.75" gasket of weatherstripping on rim between sub and box
Here's some specs on the sub:
Continuous power handling: 150w
Peak power handling: 250w
Frequency response: 25Hz-500Hz
Sensitivity: 90dB
Box volume: Sealed Airspace .45-.90 cubic feet
Mounting depth: 4"
Link to sub on CDT Audio site
Here's some specs on the box:
This picture was, of course, taken before carpet, 1.25" spacer, weatherstripping, and silicone were added.
0.75" MDF on top
0.5" MDF on sides
0.5" birch on bottom
1.25" MDF for spacer
Outside dimensions: 22" x 13" x 5"
Inside dimensions: 21" x 12" x 3.75"
Volume: Uh...don't have a calculator offhand... (21x12x3.75 + pi x 9.16^2) / 12^3
Mounting depth: 5.75" (including spacer)
Carpeted with charcoal carpet on top and sides (not bottom which you never see anyway )
All joints sealed with wood adhesive during building and then sealed again with silicone after building
0.75" gasket of weatherstripping on rim between sub and box
Thread
Thread Starter
Forum
Replies
Last Post
pikkashoe
Member S2000 Classifieds and For Sale
6
05-23-2007 08:39 AM