Mark this thread as Unsold
MS - Garage Sale - KW, Comptech, Skunk2, Wheel&Tires
#1
MS - Garage Sale - Comptech, Enkei Wheel&Tires, APR, Wasp
UPDATE 11/25/18
First Name: Taylor
Price: OBO
Location: Clinton, MS
Contact: PM or Email Taylorrgeorge@gmail.com
All prices are OBO and do not include shipping costs. PayPal payment method.
Comptech Adjustable Front Sway Bar -$750Price Drop! $600
Comptech 4-1 Stainless Header - $650
Enkei PF01s (17x9 +60) with 255 BFG Rival 1.5S tires.$1400 Price Drop! Wheels Only $800 Tires Only $500 combined price $1200
-Tires were autocrossed approx. 45-50 runs. There are no street miles on them and they have been stored inside my house.
-Wheels have some scratches,nicks and scuffs but are overall in good condition I would say. No curb rash
Enkei RPF1s (17x9 +45) with 255 Toyo R1R tires -SOLD
- Wheels are in excellent condition. No scratches just a couple small scuffs that can be buffed/polished.
- Tires have plenty of tread left on them. They were only used for autocross, no street miles. Tires have a late 2012 build date but have been stored inside a climate controlled room for years.
Eibach Pro Kit Springs - $100
APR Wing with low risers. - $300 with AP1 NFR trunk $400 - SOLD
- I believe the wing is a GTC-200 although I am not sure. It came with my AP1 car.
- The top part of the wing as well as the top of the trunk has a mist of clearcoat overspray on it. This makes the finish not smooth but the overspray can be buffed/polished out.
- There is a small scratch on the top of the wing (see below picture)
Wasp Composite Carbon/Kevlar Front Splitter with hardware -SOLD
- Purchased but never installed due to not being legal in my SCCA class. Includes hardware shown in pics.
- In good condition but has a small amount of resin de-lamination on the rear of the splitter. Can be fixed with alittle resin most likely.
KW V3 coilovers with OEM Strut Mounts (Freshly rebuilt in March of 2018) - SOLD
-Currently setup with 90N/mm - 514 lbf/in springs. Also included are two 110N/mm - 628 lbf/in and two 120N/mm - 685 lbf/in springs.
-The front brake hose tabs are bent back for big front sway bar clearance. They can be bent back but I am not sure if the weld will hold or not.
Comptech Titanium Serius Strut Bar - SOLD
Comptech Ice Box Intake with Filter Service Kit- SOLD
PLM Header - Removed due to wanting to sell the Comptech header instead
Berk 70mm High Flow Cat - SOLD
JVT Racing Ebay Header - SOLD
Skunk2 Catback Exhaust - SOLD
-Dent in one of muffler pipes - see pic below
-Scratches on bottom of mufflers
-If shipping is needed I will have to separate the mufflers from the primary pipe and most likely the gasket will disintegrate.
Kosei Formula SF (17x9 +62) with 255 Nexan SUR4G tires. SOLD
-Tires were purchased in the summer of 2017 and have less than 2000 street miles on them. They were used for autocross and have approx 40 runs on them.
- Wheels have some scuffs on them and one wheel has some scratches on the face and it was dropped on its face. See pics
First Name: Taylor
Price: OBO
Location: Clinton, MS
Contact: PM or Email Taylorrgeorge@gmail.com
All prices are OBO and do not include shipping costs. PayPal payment method.
Comptech Adjustable Front Sway Bar -
Comptech 4-1 Stainless Header - $650
Enkei PF01s (17x9 +60) with 255 BFG Rival 1.5S tires.
-Tires were autocrossed approx. 45-50 runs. There are no street miles on them and they have been stored inside my house.
-Wheels have some scratches,nicks and scuffs but are overall in good condition I would say. No curb rash
- Wheels are in excellent condition. No scratches just a couple small scuffs that can be buffed/polished.
- Tires have plenty of tread left on them. They were only used for autocross, no street miles. Tires have a late 2012 build date but have been stored inside a climate controlled room for years.
Eibach Pro Kit Springs - $100
- I believe the wing is a GTC-200 although I am not sure. It came with my AP1 car.
- The top part of the wing as well as the top of the trunk has a mist of clearcoat overspray on it. This makes the finish not smooth but the overspray can be buffed/polished out.
- There is a small scratch on the top of the wing (see below picture)
- Purchased but never installed due to not being legal in my SCCA class. Includes hardware shown in pics.
- In good condition but has a small amount of resin de-lamination on the rear of the splitter. Can be fixed with alittle resin most likely.
-Currently setup with 90N/mm - 514 lbf/in springs. Also included are two 110N/mm - 628 lbf/in and two 120N/mm - 685 lbf/in springs.
-The front brake hose tabs are bent back for big front sway bar clearance. They can be bent back but I am not sure if the weld will hold or not.
-Dent in one of muffler pipes - see pic below
-Scratches on bottom of mufflers
-If shipping is needed I will have to separate the mufflers from the primary pipe and most likely the gasket will disintegrate.
-Tires were purchased in the summer of 2017 and have less than 2000 street miles on them. They were used for autocross and have approx 40 runs on them.
- Wheels have some scuffs on them and one wheel has some scratches on the face and it was dropped on its face. See pics
Last edited by poss87; 11-25-2018 at 01:07 PM. Reason: Updates and New items added
#5
#6
Emailed
Thread
Thread Starter
Forum
Replies
Last Post
poss87
Member S2000 Classifieds and For Sale
6
02-26-2019 08:48 PM
poss87
Wheels and Tires
4
11-24-2018 07:22 PM