WI - Garage Sale - Aftermarket & OEM Parts
#401
ASM bags are all pending sale, sitting in Japan and no more are on order. ASM sticker sets are still available.
Update:
- 1 Driveshaft Shop AP2 04-09 Carbon fiber drive shaft SOLD
- Set of 2 OEM CR trunk springs $TBD shipped. Pending sale
- 5 Spoon Subframe Rigid Collar Kit S2000 AP1/AP2 New 50261-AP1-000 New. $215 shipped.
- Yperion titanium centering rings F/R Sold.
- 0 Toda Racing F20C/F22C Heavy Duty Chain Tensioner V2 14510-F20-000 $280 shipped each. Part box is opened to check for contents and taped closed. Available May.
- 1 LHT Brake Master Cylinder Brace - Steel black powder coated/Strut Bar Version $100 shipped. Used. Discontinued. Sold.
- 1 18115-PCX-014 Gasket, Exhuast Manifold (Nippon LEAkless) $22 shipped. New.
__________________
My For Sale Thread: JDM and OEM parts
My For Sale Thread: JDM and OEM parts
Last edited by jackmugen02; 05-17-2021 at 07:22 AM.
#402
Update:
- 1 Toda Racing F20C/F22C Heavy Duty Chain Tensioner V2 14510-F20-000 $280 shipped each. Part box is opened to check for contents and taped closed.
- 1 Set of F/R Rays centering rings $30 shipped. New. Silver aluminum. 2 of 73.1 OD x 70.1 ID and 2 of 73.1 OD x 64.1 ID.
- 1 CSO Hara Direct steering column collar $125 shipped. New.
- Set of 2 OEM transmission mounts $50 shipped. Used. These came off a car with 52,000 miles, all street driven. No cracks. I've cleaned these.
- 1 PW : JDM CFRP passenger side airbag covered in Red Alcantara $225 shipped. New. 2 coats of chemical guys fabric guard applied.
- 1 Auto Garage M differential reinforcement cage $1,000 shipped. New. Discontinued part. Product description(translated Japanese): S2000 drive system which is said to weakness. That is one in, was made in order to significantly solve the insufficient rigidity of the differential carrier is the differential carrier support Pro. Def mounting portion to the left and right connection, by increasing the significant strength, prevent damage of the ring gear, it is Part accelerator response up, enabling the control improvement. By connecting the left and right and tightening the tightening torque at approximately 2 times the normal torque, and strength up of differential carrier itself, but reduce the amount crowded inclination of the ring gear is the purpose of the product. The test at the OS Giken of dual-core LSD, the problem does not have occurred. Because there is a cover to interfere with part ※, it will require cutting with a belt sander. (Depends on the type of cover) ※ by the thickness of the final gear, there is a case to be non-conforming. Final gear available in the current situation will be the 3.6 3.9 4.1 4.3 4.4 or less of the ring gear. 4.7 or more is unconfirmed.
- 1 set of OEM front cooling plates, radiator and AC service cover $85 shipped. Used. The plates have some scratch and scuff marks. I've cleaned the plates. Includes the 11 clips needed to install too.
- 1 Toda Racing F20C/F22C Heavy Duty Chain Tensioner V2 14510-F20-000 $280 shipped each. Part box is opened to check for contents and taped closed.
- 1 Set of F/R Rays centering rings $30 shipped. New. Silver aluminum. 2 of 73.1 OD x 70.1 ID and 2 of 73.1 OD x 64.1 ID.
- 1 CSO Hara Direct steering column collar $125 shipped. New.
- Set of 2 OEM transmission mounts $50 shipped. Used. These came off a car with 52,000 miles, all street driven. No cracks. I've cleaned these.
- 1 PW : JDM CFRP passenger side airbag covered in Red Alcantara $225 shipped. New. 2 coats of chemical guys fabric guard applied.
- 1 Auto Garage M differential reinforcement cage $1,000 shipped. New. Discontinued part. Product description(translated Japanese): S2000 drive system which is said to weakness. That is one in, was made in order to significantly solve the insufficient rigidity of the differential carrier is the differential carrier support Pro. Def mounting portion to the left and right connection, by increasing the significant strength, prevent damage of the ring gear, it is Part accelerator response up, enabling the control improvement. By connecting the left and right and tightening the tightening torque at approximately 2 times the normal torque, and strength up of differential carrier itself, but reduce the amount crowded inclination of the ring gear is the purpose of the product. The test at the OS Giken of dual-core LSD, the problem does not have occurred. Because there is a cover to interfere with part ※, it will require cutting with a belt sander. (Depends on the type of cover) ※ by the thickness of the final gear, there is a case to be non-conforming. Final gear available in the current situation will be the 3.6 3.9 4.1 4.3 4.4 or less of the ring gear. 4.7 or more is unconfirmed.
- 1 set of OEM front cooling plates, radiator and AC service cover $85 shipped. Used. The plates have some scratch and scuff marks. I've cleaned the plates. Includes the 11 clips needed to install too.
__________________
My For Sale Thread: JDM and OEM parts
My For Sale Thread: JDM and OEM parts
#403
Update:
- 1 set of OEM front cooling plates, radiator and AC service cover $85 shipped. Used. The plates have some scratch and scuff marks. I've cleaned the plates. Includes the 11 clips needed to install too. Sold
- 1 Set of F/R Rays centering rings $30 shipped. New. Silver aluminum. 2 of 73.1 OD x 70.1 ID and 2 of 73.1 OD x 64.1 ID. 2 sets left.
- 1 ASM Bearing Guide ASM-AP100232 $TBD shipped. New. A bearing guide that improves the strength by WPC processing and enhances slid ability by DLC coating, enabling smooth clutch operation.
- 1 ASM release fork ASM-AP100236 $TBD shipped. New. WPC treated parts. It reduces the de-greasing of the release bearing holder, smooth movement and suppresses abnormal noise during long-term use.
- 1 ASM release bearing ASM-AP100251 $TBD shipped. New. This is a new NACHI bearing that is disassembled, WPC treated, packed with high temp urea grease and reassembled. Release bearing with WPC treatment processing that is resistant to high rotation and high heat at the part in contact with the release fork. Prevents grease from running out, improves wear resistance, and reduces operating resistance to reduce the load on the bearing, extending its life and improving operability.
- 1 set of OEM front cooling plates, radiator and AC service cover $85 shipped. Used. The plates have some scratch and scuff marks. I've cleaned the plates. Includes the 11 clips needed to install too. Sold
- 1 Set of F/R Rays centering rings $30 shipped. New. Silver aluminum. 2 of 73.1 OD x 70.1 ID and 2 of 73.1 OD x 64.1 ID. 2 sets left.
- 1 ASM Bearing Guide ASM-AP100232 $TBD shipped. New. A bearing guide that improves the strength by WPC processing and enhances slid ability by DLC coating, enabling smooth clutch operation.
- 1 ASM release fork ASM-AP100236 $TBD shipped. New. WPC treated parts. It reduces the de-greasing of the release bearing holder, smooth movement and suppresses abnormal noise during long-term use.
- 1 ASM release bearing ASM-AP100251 $TBD shipped. New. This is a new NACHI bearing that is disassembled, WPC treated, packed with high temp urea grease and reassembled. Release bearing with WPC treatment processing that is resistant to high rotation and high heat at the part in contact with the release fork. Prevents grease from running out, improves wear resistance, and reduces operating resistance to reduce the load on the bearing, extending its life and improving operability.
__________________
My For Sale Thread: JDM and OEM parts
My For Sale Thread: JDM and OEM parts
#404
Update:
- 2 Spoon Subframe Rigid Collar Kit S2000 AP1/AP2 New 50261-AP1-000 New. $215 shipped.
- 1 ASM Ruby Alcantara shoulder cover SOLD
- 1 set of soft top latches Lock Assembly, L Handle - Honda (86260-S2A-J01) Lock Assembly and R Handle - Honda (86250-S2A-J01) $150 shipped. Used for 53,000 miles. Screws included. I've cleaned these.
- 1 set of wiper blades/holders 1 Blade, Windshield Wiper (400MM) - Honda (76620-S2A-A03) and 1 Blade, Windshield Wiper (500MM) - Honda (76630-S2A-A03) $25 shipped. Used for 1,700 miles. I saw a paint damage/rust spot on one of them. I've cleaned these.
- 1 set of rubber wiper blades from Spoon wiper blades 1 Blade, Windshield Wiper (400MM) - Honda (76620-S2A-A03) and 1 Rubber, Blade (500MM) - Honda (76632-S6M-003) $18 shipped . New.
- 1 Front bumper Honda emblem Emblem, Front Center (H) - Honda (75700-S2A-J00) $ 20 shipped. Used. Clips are broken off the back and it has some scratches.
- 2 Soft top motor Motor, Soft Top - Honda (86400-S2A-003) $70 shipped each. Used for 53,000 miles. Clip, Connector (Natural) - Honda (91533-S04-003) is missing from one motor. Worked fine before removing. I have cleaned these.
- 1 Insulator, Hood - Honda (74141-S2A-030) and 12 Clip, Engine Hood Insulator - Honda (91501-S1K-003) $100 shipped. Used for 53,000 miles. Hood insulator has some wear marks in spots. All the required/correct clips included.
- 1 Toda Racing USA license plate frame $15 shipped. This has some paint damage. These were a limited run item from Toda Racing USA, discontinued now.
- 1 TODA RACING Free Adjusting Cam Gears 14210-F20-000 Set of 2 HONDA S2000 F20/F22 $750 shipped. Toda sticker shown in picture not included..Re-designing the F20C cam gears from two to three sections, Toda Racing has been able to keep the original scissors mechanism (noise reduction) and incorporate adjustability into the cam gears. The adjustment can be carried out to 1 deg of the crank angle. With a vernier degree scale. Last set.
- 1 Toda Racing Heavy Duty Oil Pump Chain Honda S2000 F20C/F22C 13441-F20-P00 $152 shipped. New. Last one.
- 1 TODA Heavy Duty Chain Honda S2000 F20C/F22C 13441-F20-P00 $200 shipped. Last one.
- 1 Volk Racing Repair Spoke Sticker - Red 17" - 18" TE37SL Set of 4 $100 shipped. New. Last one.
- 1 CSO Hara Direct steering column collar $125 shipped. New. Sold
- 1 M&M Honda Clutch Pedal Reinforcement RHD 00108-AP1-ST01 Sold
- 1 NRG engine damper S2000 EDA-402SL $89 shipped. New. This is the no heat shield silver damper version.
- 2 Spoon Subframe Rigid Collar Kit S2000 AP1/AP2 New 50261-AP1-000 New. $215 shipped.
- 1 ASM Ruby Alcantara shoulder cover SOLD
- 1 set of soft top latches Lock Assembly, L Handle - Honda (86260-S2A-J01) Lock Assembly and R Handle - Honda (86250-S2A-J01) $150 shipped. Used for 53,000 miles. Screws included. I've cleaned these.
- 1 set of wiper blades/holders 1 Blade, Windshield Wiper (400MM) - Honda (76620-S2A-A03) and 1 Blade, Windshield Wiper (500MM) - Honda (76630-S2A-A03) $25 shipped. Used for 1,700 miles. I saw a paint damage/rust spot on one of them. I've cleaned these.
- 1 set of rubber wiper blades from Spoon wiper blades 1 Blade, Windshield Wiper (400MM) - Honda (76620-S2A-A03) and 1 Rubber, Blade (500MM) - Honda (76632-S6M-003) $18 shipped . New.
- 1 Front bumper Honda emblem Emblem, Front Center (H) - Honda (75700-S2A-J00) $ 20 shipped. Used. Clips are broken off the back and it has some scratches.
- 2 Soft top motor Motor, Soft Top - Honda (86400-S2A-003) $70 shipped each. Used for 53,000 miles. Clip, Connector (Natural) - Honda (91533-S04-003) is missing from one motor. Worked fine before removing. I have cleaned these.
- 1 Insulator, Hood - Honda (74141-S2A-030) and 12 Clip, Engine Hood Insulator - Honda (91501-S1K-003) $100 shipped. Used for 53,000 miles. Hood insulator has some wear marks in spots. All the required/correct clips included.
- 1 Toda Racing USA license plate frame $15 shipped. This has some paint damage. These were a limited run item from Toda Racing USA, discontinued now.
- 1 TODA RACING Free Adjusting Cam Gears 14210-F20-000 Set of 2 HONDA S2000 F20/F22 $750 shipped. Toda sticker shown in picture not included..Re-designing the F20C cam gears from two to three sections, Toda Racing has been able to keep the original scissors mechanism (noise reduction) and incorporate adjustability into the cam gears. The adjustment can be carried out to 1 deg of the crank angle. With a vernier degree scale. Last set.
- 1 Toda Racing Heavy Duty Oil Pump Chain Honda S2000 F20C/F22C 13441-F20-P00 $152 shipped. New. Last one.
- 1 TODA Heavy Duty Chain Honda S2000 F20C/F22C 13441-F20-P00 $200 shipped. Last one.
- 1 Volk Racing Repair Spoke Sticker - Red 17" - 18" TE37SL Set of 4 $100 shipped. New. Last one.
- 1 CSO Hara Direct steering column collar $125 shipped. New. Sold
- 1 M&M Honda Clutch Pedal Reinforcement RHD 00108-AP1-ST01 Sold
- 1 NRG engine damper S2000 EDA-402SL $89 shipped. New. This is the no heat shield silver damper version.
__________________
My For Sale Thread: JDM and OEM parts
My For Sale Thread: JDM and OEM parts
Last edited by jackmugen02; 05-27-2021 at 07:23 AM.
#405
Update:
- 1 set of Buddy Club 00-03 Honda S2000 AP1 Tail Lights SOLD
- 1 Spoon Subframe Rigid Collar Kit S2000 AP1/AP2 New 50261-AP1-000 New. $215 shipped. Last one.
- 1 YellR yellow box V5 with plug n play harness $110 shipped. New. Back ordered at YellR and price will increase on these on the next shipment. SOLD
- 2 Front sway bar Spring, Front Stabilizer (26.5MMXT4.5) - Honda (51300-S2A-013) 02-03 $TBD shipped. One with 1,700 miles and the other with 53,000. Comes with 2 bushings. Rusty near end link mounting holes.
- 2 Rear sway bar Spring (27.2MMX4.5T) - Honda (52300-S2A-305) 02-03 $TBD shipped. One with 1,700 miles and the other with 53,000. Comes with 2 bushings. Rusty near end link mounting holes.
- 1 C-West N1 FRONT BUMPER II with Front Canard II set $TBD shipped. Front bumper has been prepped at a body shop and test fitted. It needs to be trimmed in areas for better fitment(See photos and black marks). Canards are new in box and need to be clear coated. Manual,sticker and hardware included.
- 1 set of Buddy Club 00-03 Honda S2000 AP1 Tail Lights SOLD
- 1 Spoon Subframe Rigid Collar Kit S2000 AP1/AP2 New 50261-AP1-000 New. $215 shipped. Last one.
- 1 YellR yellow box V5 with plug n play harness $110 shipped. New. Back ordered at YellR and price will increase on these on the next shipment. SOLD
- 2 Front sway bar Spring, Front Stabilizer (26.5MMXT4.5) - Honda (51300-S2A-013) 02-03 $TBD shipped. One with 1,700 miles and the other with 53,000. Comes with 2 bushings. Rusty near end link mounting holes.
- 2 Rear sway bar Spring (27.2MMX4.5T) - Honda (52300-S2A-305) 02-03 $TBD shipped. One with 1,700 miles and the other with 53,000. Comes with 2 bushings. Rusty near end link mounting holes.
- 1 C-West N1 FRONT BUMPER II with Front Canard II set $TBD shipped. Front bumper has been prepped at a body shop and test fitted. It needs to be trimmed in areas for better fitment(See photos and black marks). Canards are new in box and need to be clear coated. Manual,sticker and hardware included.
__________________
My For Sale Thread: JDM and OEM parts
My For Sale Thread: JDM and OEM parts
Last edited by jackmugen02; 06-02-2021 at 08:20 AM.
#406
Update:
- 1 MUGEN AP1 00-03 bushing set $682 shipped. Last set, no more on order.
- 1 Front Compliance Set - 2 Piece Set [51391-XGS-S0N0]
- 1 Front Lower Arm Set - 2 Piece Set [51353-XGS-S0N0]
- 1 Front & Rear Upper Arm Set - 8 Piece Set [51455-XGS-S0N0]
- 1 Rear Lower Arm Set - 2 Piece Set [52353-XGS-S0N0] (rear lower front hard rubber bushings are not available from MUGEN/Spoon/Hardrace)
- 1 Front & Rear Lower Damper Set - 4 Piece Set [51810-XGS-S0N0]
- 1 Set of Front Rays centering rings $17 shipped. New. Silver aluminum. 2 of 73.1 OD x 70.1 ID. 2 sets left.
- 1 YAGI Dry Carbon Fuel Pump Cover - Honda S2000 SOLD.
- 1 MUGEN AP1 00-03 bushing set $682 shipped. Last set, no more on order.
- 1 Front Compliance Set - 2 Piece Set [51391-XGS-S0N0]
- 1 Front Lower Arm Set - 2 Piece Set [51353-XGS-S0N0]
- 1 Front & Rear Upper Arm Set - 8 Piece Set [51455-XGS-S0N0]
- 1 Rear Lower Arm Set - 2 Piece Set [52353-XGS-S0N0] (rear lower front hard rubber bushings are not available from MUGEN/Spoon/Hardrace)
- 1 Front & Rear Lower Damper Set - 4 Piece Set [51810-XGS-S0N0]
- 1 Set of Front Rays centering rings $17 shipped. New. Silver aluminum. 2 of 73.1 OD x 70.1 ID. 2 sets left.
- 1 YAGI Dry Carbon Fuel Pump Cover - Honda S2000 SOLD.
__________________
My For Sale Thread: JDM and OEM parts
My For Sale Thread: JDM and OEM parts
Last edited by jackmugen02; 06-05-2021 at 07:47 AM.
#407
Update
- 1 MUGEN Front Compliance Set - 2 Piece Set 51391-XGS-S0N0 Honda S2000 00-09 $100 shipped. New.
- 1 MUGEN AP1 00-03 bushing set $682 shipped. Last set, no more on order. SOLD
- 1 MUGEN ON switch and harness for Honda S2000 $255 shipped. New. Switch will turn white for accessory and red for ignition/pushed. Switch will require you to drill out dash bezel for install.
- 1 MUGEN Front Compliance Set - 2 Piece Set 51391-XGS-S0N0 Honda S2000 00-09 $100 shipped. New.
- 1 MUGEN AP1 00-03 bushing set $682 shipped. Last set, no more on order. SOLD
- 1 MUGEN ON switch and harness for Honda S2000 $255 shipped. New. Switch will turn white for accessory and red for ignition/pushed. Switch will require you to drill out dash bezel for install.
__________________
My For Sale Thread: JDM and OEM parts
My For Sale Thread: JDM and OEM parts
#408
Update:
- 1 Rays LE 37T 18x7.5" +48 114.3 PCD 73.1mm center bore Gunmetal $TBD shipped. This wheel has about 2,000 miles on it. No valve stem included. Choice of one of 4 center caps pictured. This wheel has a faded spec sticker, bent rim in one spot, scratch on rim and a small dent in the rim.
- 1 Rays LE 37T 18x7.5" +48 114.3 PCD 73.1mm center bore Gunmetal $TBD shipped. This wheel has about 2,000 miles on it. No valve stem included. Choice of one of 4 center caps pictured. This wheel has a deep scratch on the back of one of the spokes, dent on rim and touch up paint/blend near the lug holes.
- 1 Rays LE 37T 18x8.5" +50 114.3 PCD 73.1mm center bore Gunmetal $TBD shipped. This wheel has about 2,000 miles on it. No valve stem included. Choice of one of 4 center caps pictured. This wheel has a repainted spoke, but it's a different lighter shade than the rest of the wheel.
- 1 Rays LE 37T 18x7.5" +48 114.3 PCD 73.1mm center bore Gunmetal $TBD shipped. This wheel has about 2,000 miles on it. No valve stem included. Choice of one of 4 center caps pictured. This wheel has a faded spec sticker, bent rim in one spot, scratch on rim and a small dent in the rim.
- 1 Rays LE 37T 18x7.5" +48 114.3 PCD 73.1mm center bore Gunmetal $TBD shipped. This wheel has about 2,000 miles on it. No valve stem included. Choice of one of 4 center caps pictured. This wheel has a deep scratch on the back of one of the spokes, dent on rim and touch up paint/blend near the lug holes.
- 1 Rays LE 37T 18x8.5" +50 114.3 PCD 73.1mm center bore Gunmetal $TBD shipped. This wheel has about 2,000 miles on it. No valve stem included. Choice of one of 4 center caps pictured. This wheel has a repainted spoke, but it's a different lighter shade than the rest of the wheel.
__________________
My For Sale Thread: JDM and OEM parts
My For Sale Thread: JDM and OEM parts
#409
Update:
- 1 ASM Bearing Guide ASM-AP100232 $100 shipped. New. A bearing guide that improves the strength by WPC processing and enhances slid ability by DLC coating, enabling smooth clutch operation.
- 1 ASM release fork ASM-AP100236 $192 shipped. New. WPC treated parts. It reduces the de-greasing of the release bearing holder, smooth movement and suppresses abnormal noise during long-term use.
- 1 ASM release bearing ASM-AP100251 $217 shipped. New. This is a new NACHI bearing that is disassembled, WPC treated, packed with high temp urea grease and reassembled. Release bearing with WPC treatment processing that is resistant to high rotation and high heat at the part in contact with the release fork. Prevents grease from running out, improves wear resistance, and reduces operating resistance to reduce the load on the bearing, extending its life and improving operability.
- 2 MUGEN AP1 00-03 bushing set $687 shipped. Last 2 sets, no more on order.
- 1 Front Compliance Set - 2 Piece Set [51391-XGS-S0N0]
- 1 Front Lower Arm Set - 2 Piece Set [51353-XGS-S0N0]
- 1 Front & Rear Upper Arm Set - 8 Piece Set [51455-XGS-S0N0]
- 1 Rear Lower Arm Set - 2 Piece Set [52353-XGS-S0N0] (rear lower front hard rubber bushings are not available from MUGEN/Spoon/Hardrace)
- 1 Front & Rear Lower Damper Set - 4 Piece Set [51810-XGS-S0N0]
- 1 ASM Bearing Guide ASM-AP100232 $100 shipped. New. A bearing guide that improves the strength by WPC processing and enhances slid ability by DLC coating, enabling smooth clutch operation.
- 1 ASM release fork ASM-AP100236 $192 shipped. New. WPC treated parts. It reduces the de-greasing of the release bearing holder, smooth movement and suppresses abnormal noise during long-term use.
- 1 ASM release bearing ASM-AP100251 $217 shipped. New. This is a new NACHI bearing that is disassembled, WPC treated, packed with high temp urea grease and reassembled. Release bearing with WPC treatment processing that is resistant to high rotation and high heat at the part in contact with the release fork. Prevents grease from running out, improves wear resistance, and reduces operating resistance to reduce the load on the bearing, extending its life and improving operability.
- 2 MUGEN AP1 00-03 bushing set $687 shipped. Last 2 sets, no more on order.
- 1 Front Compliance Set - 2 Piece Set [51391-XGS-S0N0]
- 1 Front Lower Arm Set - 2 Piece Set [51353-XGS-S0N0]
- 1 Front & Rear Upper Arm Set - 8 Piece Set [51455-XGS-S0N0]
- 1 Rear Lower Arm Set - 2 Piece Set [52353-XGS-S0N0] (rear lower front hard rubber bushings are not available from MUGEN/Spoon/Hardrace)
- 1 Front & Rear Lower Damper Set - 4 Piece Set [51810-XGS-S0N0]
__________________
My For Sale Thread: JDM and OEM parts
My For Sale Thread: JDM and OEM parts
Last edited by jackmugen02; 06-23-2021 at 08:25 AM.
#410
Update:
- 1 Spoon Gusset Plate Set S2000 AP1 00-03 60815-AP1-000 SOLD
- 1 ASM Bearing Guide ASM-AP100232 $100 shipped. New. A bearing guide that improves the strength by WPC processing and enhances slid ability by DLC coating, enabling smooth clutch operation. SOLD
- 1 ASM release fork ASM-AP100236 $192 shipped. New. WPC treated parts. It reduces the de-greasing of the release bearing holder, smooth movement and suppresses abnormal noise during long-term use. SOLD
- 1 ASM release bearing ASM-AP100251 $217 shipped. New. This is a new NACHI bearing that is disassembled, WPC treated, packed with high temp urea grease and reassembled. Release bearing with WPC treatment processing that is resistant to high rotation and high heat at the part in contact with the release fork. Prevents grease from running out, improves wear resistance, and reduces operating resistance to reduce the load on the bearing, extending its life and improving operability. SOLD
- 1 Set of Front Rays centering rings $17 shipped. New. Silver aluminum. 2 of 73.1 OD x 70.1 ID. Last set.
- 1 Toda Racing Light Weight Crank Pulley Red from F20C/F22C(AP1/AP2) Light Weight Front Pulley KIT 13810-F20-HAC SOLD
- 1 Spoon Gusset Plate Set S2000 AP1 00-03 60815-AP1-000 SOLD
- 1 ASM Bearing Guide ASM-AP100232 $100 shipped. New. A bearing guide that improves the strength by WPC processing and enhances slid ability by DLC coating, enabling smooth clutch operation. SOLD
- 1 ASM release fork ASM-AP100236 $192 shipped. New. WPC treated parts. It reduces the de-greasing of the release bearing holder, smooth movement and suppresses abnormal noise during long-term use. SOLD
- 1 ASM release bearing ASM-AP100251 $217 shipped. New. This is a new NACHI bearing that is disassembled, WPC treated, packed with high temp urea grease and reassembled. Release bearing with WPC treatment processing that is resistant to high rotation and high heat at the part in contact with the release fork. Prevents grease from running out, improves wear resistance, and reduces operating resistance to reduce the load on the bearing, extending its life and improving operability. SOLD
- 1 Set of Front Rays centering rings $17 shipped. New. Silver aluminum. 2 of 73.1 OD x 70.1 ID. Last set.
- 1 Toda Racing Light Weight Crank Pulley Red from F20C/F22C(AP1/AP2) Light Weight Front Pulley KIT 13810-F20-HAC SOLD
__________________
My For Sale Thread: JDM and OEM parts
My For Sale Thread: JDM and OEM parts
Last edited by jackmugen02; 06-19-2021 at 06:57 AM.