This is a topic for whoever/whatever might start, end, have a connection to, (yes, even stay in) southern and the eastern shore of Maryland. 'Eastern Shore' is fairly well defined; generally, SOMD will be considered to be in Maryland, as far north as approximately halfway between route 100 (near BWI) and route 50, heading south to Scotland and Point Lookout State Park; The purpose of this topic is to give SOMD and ESMD S2KE (S2000 Enthusiasts) the opportunity to 'communicate locally'; it is inclusive, not exclusive.

Events of interest to SOMD and ESMD S2KE that may be outside this area but have interest to those in SOMD/ESMD, should have their own topic while a reference and link to that topic may appear here. That way, one event won't come to dominate this topic for a time.

Welcome to all!

 

Bump for a good idea! I am from Hollywood myself.

We can use this thread for any local events but to also ccordinate with other local S2KE's to drive to the main Mid-A events together

 

This is a pretty useful idea. I'm all over Calvert myself.

 

There are the boat races that are happening at Solomon's on the 14th and 15th of September. I will be there most likely.

 

1 - add secondary driveshaft through the back side of differential case

2 - add propeller and underbody kit

3 - cross ramp while accelerating through 60mph in third as you reach the water

4 - keep revs up until you've reached the other shore

5 - resume breathing

 

 

I'll be headed to those races too. Are tickets of any kind required? If so I might just find my way to a bar lol

 

I don't know the details of the boat racing, but here's a site about it . . .

2013 Solomons Island Offshore Grand Prix

 

Saturday afternoon, perhaps 4PM, saw a GPW heading north on Rt 4 near Sixes Rd. I didn't see you till the last second; wide tires extending beyond the fenders. Are you local, new to the area? My first time spotting you, at least with those wheels.

 

I have a design/install idea I'd like to try, but before I attempt the shaping mod on the front bumper of our S, I'd like some practice. If you have a good-for-nothing portion of an OEM front bumper area laying about, I'd be interested in picking it up real cheap; slight preference for AP2; for this purpose, no color preference. Thanks.