Racing Harness install
#1
Registered User
Thread Starter
Join Date: Jan 2006
Location: Waldorf Md
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Racing Harness install
I am gettin ready to purchace some corbeau racing seats for my car and i cant figure out a good way to install the harnesses for the seats. i was hoping that maybe one of you might have suggestion. my last resort is a 4 or 6 point cage with a harness bar.
#2
Registered User
I'm curious as well, I just put a Bride Zeta 3 seat in my car with a pretty low seating position. I passed the broom test by 2 inches and am now wondering if there is a safe way to mount a 5 point harness.
#3
Join Date: Feb 2005
Location: Over the Electric Grapevine.....man
Posts: 42,116
Likes: 0
Received 31 Likes
on
30 Posts
if you don't want to put a roll bar in and mess with the plastic you'll have to modify something to maybe go around the roll hoops?
i don't know any other way unless you mess with the plastic or put in a roll bar.....
........i have nothing to worry about
i don't know any other way unless you mess with the plastic or put in a roll bar.....
........i have nothing to worry about
#4
Registered User
Thread Starter
Join Date: Jan 2006
Location: Waldorf Md
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
I found a roll bar that isn't too expensive but i have never herd of the company its made by elda engineering and costs $665 from tech2.
http://www.tech2motorsports.com/cat/catalo...e61add3cffb2411
http://www.tech2motorsports.com/cat/catalo...e61add3cffb2411
#5
Join Date: Feb 2005
Location: Over the Electric Grapevine.....man
Posts: 42,116
Likes: 0
Received 31 Likes
on
30 Posts
i have an elda bar! it's great, functional, and badass, but, you have to cut the plastic behind both the driver and pass. seat.
long story short, they are not being made right now. the go fast labs is trying to find a good welder to fabricate these bad boys in bulk. so you would have to do a custom bar like 3312dc has done or you guy a crushco and just have it for a harness bar (not functional for safety)
long story short, they are not being made right now. the go fast labs is trying to find a good welder to fabricate these bad boys in bulk. so you would have to do a custom bar like 3312dc has done or you guy a crushco and just have it for a harness bar (not functional for safety)
#6
Registered User
Originally Posted by CrazyCracker82,Jan 16 2006, 07:33 PM
........i have nothing to worry about
Trending Topics
#9
Registered User
Originally Posted by SC-S2000,Jan 16 2006, 08:02 PM
I found a roll bar that isn't too expensive but i have never herd of the company its made by elda engineering and costs $665 from tech2.
http://www.tech2motorsports.com/cat/catalo...e61add3cffb2411
http://www.tech2motorsports.com/cat/catalo...e61add3cffb2411
#10
Registered User
Join Date: May 2004
Location: London, England
Posts: 43,083
Likes: 0
Received 0 Likes
on
0 Posts
you don't really want to run a 5 point harness on the street anyways... it limits your ability to turn to view your blind spots, will also limit your ability to tuck incase of a roll over... (hense the reason you need a roll bar)....