Vortech Supercharger kit
#1
Registered User
Thread Starter
Join Date: Oct 2004
Location: Southern Maryland
Posts: 1,631
Likes: 0
Received 0 Likes
on
0 Posts
Vortech Supercharger kit
I'm buying a house so the some of the toys have got to go.
I have here a Vortech Satin Supercharger kit with aftercooler + extra high boost parts good for 400whp+
SOLD
Includes:
- Full Vortech kit minus FMU and Fuel pump
- 5" vortech pulley, 3.9" and 3.8" ASP Racing pulleys
- Titanium vtec solenoid bolts (brand new set, never used, common problem with this kit)
- Custom 4" intake with 4" genuine K & N Filter
- RC Engineering 750CC injectors with plug and play clips and fuel rail spacers
- Tuner Toys Map adapter to use aftermarket map sensor in stock location
- AEM 3.5 bar map sensor with harness
- AEM 1052U EMS with built in UEGO wideband sensor
- T-Clamps and hose technique silicone hoses
- Belt for 3.9" and 3.8" pulley as well as belt for 5" pulley
- Stock S2000 Oil pan pre-drilled and tapped
- The original map clamp, timing controller, vortech intake and original hose clamps and hoses will all be included as well.
-Also will include a brand new 2mm comptech HG. I bought two and only used one...
The kit has approx. 10k miles on it with no problems and only 3k of that at high boost levels. The EMS has a Jeff Evans tune on it now that made 390rwhp on a 100 degree day with 2mm HG, 70mm exhaust, and aftermarket header.
Located around 20670...
I have here a Vortech Satin Supercharger kit with aftercooler + extra high boost parts good for 400whp+
SOLD
Includes:
- Full Vortech kit minus FMU and Fuel pump
- 5" vortech pulley, 3.9" and 3.8" ASP Racing pulleys
- Titanium vtec solenoid bolts (brand new set, never used, common problem with this kit)
- Custom 4" intake with 4" genuine K & N Filter
- RC Engineering 750CC injectors with plug and play clips and fuel rail spacers
- Tuner Toys Map adapter to use aftermarket map sensor in stock location
- AEM 3.5 bar map sensor with harness
- AEM 1052U EMS with built in UEGO wideband sensor
- T-Clamps and hose technique silicone hoses
- Belt for 3.9" and 3.8" pulley as well as belt for 5" pulley
- Stock S2000 Oil pan pre-drilled and tapped
- The original map clamp, timing controller, vortech intake and original hose clamps and hoses will all be included as well.
-Also will include a brand new 2mm comptech HG. I bought two and only used one...
The kit has approx. 10k miles on it with no problems and only 3k of that at high boost levels. The EMS has a Jeff Evans tune on it now that made 390rwhp on a 100 degree day with 2mm HG, 70mm exhaust, and aftermarket header.
Located around 20670...
Thread
Thread Starter
Forum
Replies
Last Post
Danks2k
Member S2000 Classifieds and For Sale
12
10-07-2008 08:15 AM
Danks2k
New York - Metro New York S2000 Owners
13
09-26-2008 03:12 PM
Jenner
Member S2000 Classifieds and For Sale
1
07-22-2003 12:47 PM