jordannn93

Also do you guys use any weather stripping or seals on the overfenders? If so what.

bouford

washabis2k (brian) did at some point but my painter suggested against it since we pop-riveted the rear overs on.
i've seen others use threaded inserts to have the ability remove the rear over. i opted against this to keep it flush as possible to the body.

jordannn93

Lots of good stuff in here. Maybe I'll do 9.5 +30 with a 275/35/18

Corey Maurer

I run 17x9.5 +38 with 275s, my alignment is only done by eye right now till I get the tranny back in and get it on the rack, but I have plenty of clearance and close to no negative camber

Corey Maurer

Pic for reference



And since is the wide fender thread, here's my downforce fenders with 17x9.5 +38 with 255s!!

chrisaltima

OEM'ish pull - 17x9.5+38 still retain full stock lines...approximately an inch of metal welded to the OEM metal fenders...

chrisaltima

on 255/40 ^^^

rjds2k

FVSD.

rjds2k

rjds2k