The quest for "Flushness" using AP2 OEM Wheels!
Joined: Oct 2007
Posts: 3,121
Likes: 75
From: Los angeles
i run the stock rear 17x8.5 rim on the front with no spacers with 255/40/17. I bored out the rear wheel so it will fit the front hub. I run a 32mm spacer for the rear and i run the stock front 17x7 rim on the rear custom widen to 17x10.5 with a 275/40/17. fenders are not rolled and it does not rub. Car is on stock suspension.
275 tires looks stretched on the 10.5 wide rim
275 tires looks stretched on the 10.5 wide rim
Joined: Aug 2011
Posts: 1,312
Likes: 16
From: Central Texas
looking to trade my 25mm option selects rear spacers for a set of 20 or 17 with built in studs only. let me know if any of you are interested.
mine only have 1k miles on them, stepped up to 255s so i need something a little less agressive
mine only have 1k miles on them, stepped up to 255s so i need something a little less agressive
Registered User
Joined: May 2013
Posts: 1,448
Likes: 6
Originally Posted by garykoo' timestamp='1384283148' post='22873780
Hey i'm running 15mm front and 20mm rear right now and I'm lowered by 1". I'm planning to get coilovers soon and lower it .5" more so 1.5" drop. Will i need to roll and flare my fenders? Only my rear rub on big dips but overall not much rubbing overall.
I'm running 15f/17r spacers on AP2v2 wheels lowered 1.2" on Swift Spec R springs w/ camber at 1.8f/2.5r and I don't rub at all. I'm still running 215/245. After these tires go, I'm switching to 225/255 and rolling the fenders.
Joined: Jun 2011
Posts: 1,760
Likes: 2
From: Nor Cal (Humboldt, Ca)
i run the stock rear 17x8.5 rim on the front with no spacers with 255/40/17. I bored out the rear wheel so it will fit the front hub. I run a 32mm spacer for the rear and i run the stock front 17x7 rim on the rear custom widen to 17x10.5 with a 275/40/17. fenders are not rolled and it does not rub. Car is on stock suspension.
How much material did you have to remove?
Looking to do the same thing to run a square set up on AP2 v1 Wheels
