Wheelbase Question
Thread Starter
Registered User
Joined: Apr 2009
Posts: 998
Likes: 3
From: Vancouver
Wheelbase Question
So recently someone hit my vehicle while i was parked, and pushed it onto the curb.
What was damaged: front subframe was bent, lower rad support and rear lower control arm.
What was done: replaced front subframe along with both arms on the front left side, replaced rear lower control arm. Repaired lower rad support.
The car was aligned:
7.1deg caster
-1.8 front camber
0 toe
-2.5 rear camber
and .2 degree total toe.
Secondary angles were 10.9deg left, 10.3 deg right.
Included angle left: 9.1deg and 8.5deg right.
Setback: front: 0 , rear: 0.9"
Track width diff: -2.6"
Wheel base diff 0.9"
That is my main concern, why is my wheel base 0.9" off :/
What was damaged: front subframe was bent, lower rad support and rear lower control arm.
What was done: replaced front subframe along with both arms on the front left side, replaced rear lower control arm. Repaired lower rad support.
The car was aligned:
7.1deg caster
-1.8 front camber
0 toe
-2.5 rear camber
and .2 degree total toe.
Secondary angles were 10.9deg left, 10.3 deg right.
Included angle left: 9.1deg and 8.5deg right.
Setback: front: 0 , rear: 0.9"
Track width diff: -2.6"
Wheel base diff 0.9"
That is my main concern, why is my wheel base 0.9" off :/
Thread Starter
Registered User
Joined: Apr 2009
Posts: 998
Likes: 3
From: Vancouver
So recently someone hit my vehicle while i was parked, and pushed it onto the curb.
What was damaged: front subframe was bent, lower rad support and rear lower control arm.
What was done: replaced front subframe along with both arms on the front left side, replaced rear lower control arm. Repaired lower rad support.
The car was aligned:
7.1deg caster
-1.8 front camber
0 toe
-2.5 rear camber
and .2 degree total toe.
Secondary angles were 10.9deg left, 10.3 deg right.
Included angle left: 9.1deg and 8.5deg right.
Setback: front: 0 , rear: 0.9"
Track width diff: -2.6"
Wheel base diff 0.9"
That is my main concern, why is my wheel base 0.9" off :/
What was damaged: front subframe was bent, lower rad support and rear lower control arm.
What was done: replaced front subframe along with both arms on the front left side, replaced rear lower control arm. Repaired lower rad support.
The car was aligned:
7.1deg caster
-1.8 front camber
0 toe
-2.5 rear camber
and .2 degree total toe.
Secondary angles were 10.9deg left, 10.3 deg right.
Included angle left: 9.1deg and 8.5deg right.
Setback: front: 0 , rear: 0.9"
Track width diff: -2.6"
Wheel base diff 0.9"
That is my main concern, why is my wheel base 0.9" off :/
Thread
Thread Starter
Forum
Replies
Last Post
FREEK
Want to Buy
1
Feb 1, 2013 06:36 AM
FREEK
Delaware Valley S2000 Members
0
Jan 30, 2013 06:54 PM
FREEK
NYC Metro Stock Exchange
0
Jan 30, 2013 06:51 PM