Im currently running nothing but guages as a gauge cluster. No rpm,mph, or fuel level. Its not really neccesary but i would like to add the final touch to the s13k.
Just to give a list of the wire setup i have to maybe help some of the question you might have.The gauge cluster is going in a 94 s13. with a f24c.

AEM plug & play ems.
S2000 Ap1 Harness, not sure what sensors i need for cluster


I know the issue with the fuel gauge im assuming is going to be the ohms readings being different from the stock sending unit of the s13 to the wiring harness of the s2k..I do have a speed sensor plugged in, but besides that im not sure what i need for the rest. Any other question feel free to ask, and thx for the help guys!

 

Come on guys??? No advice at all? I know this has been done before in ae86,etc.. If you have any questions about what i have let me..Thanks!!

 

You should have a harness for the cluster and it should be plug and play unless you did some funky wiring.

 

you may want to try clubroadster.net or the miata forum. Those guys have more experence with swaping clusters then most of us