So a while ago I added the DEI window modulator to my system for one-touch up/down windows. Once it was in, I set the passenger side on high resistance so it would go up and down completely, but over the past week, the passenger window has stopped going all the way up with one-touch, or even if I just hold the switch, it gets most of the way up, and then it takes another three taps to incrementally get it all the way up over the last couple inches.

Since I'm already at the highest resistance rating, is there anything I can do to get the window to go all the way up? What does the factory setting on the jump switches do anyway?

Thanks,

 

Well, fwiw, I cleaned the window, and pushed out as I rolled it up a few times, and that seems to have resolved the issue.