ss04

I'm curious how the wiring schematics work for this...

Do you have to route the speaker cables through the module, then when you get a call it cuts the signal from passing through?

I guess MIC placement is critical too then... too close to the speaker(s) and the person on the other end would hear themselves echoing?

ss04

BTW s4play - check your PM I had a couple questions for you. Thanks!

MikeyCB

If you could try to keep any project questions and answers in here as opposed to PMs that would be great, I'm pretty interested in this install for myself!

I'm surprised you chose the driver door speaker actually, I find that due to the placement of them I tend to hear more sound from the passenger side because my leg blocks the driver speaker.

ss04

you're assuming my PM is about the blue tooth install... which it is not. Hence why I chose to PM him

MikeyCB

No prob, just wanted to make sure
I'm not policing your communication

Side note: Why do people say "You've got PM." They get notified other ways as well....

Rex Leo

That is ILL!!!!!!

s4play

thanks for all the comments guys - I'm on vacation right now so won't be checking the forum as often but will try to get back to everyone!

ss04, just replied but click on the link in my sig on the first page for double din questions!


rick

s4play

hey guys,

I've finally found a good place for the h/f MIC but one problem - I don't know how to remove the dash trim piece (the plastic part that goes around the radio controls and temp control).

I know some of you removed it to paint body color but how does that come off? Does it just snap off?

Help me out so I can post some finished pics


rick

Chi-CityAp2

that thing is sweet.. your car is a inspiration

s4play

Found a good spot for the MiC finally that works top down!