rdtech

Guys,

Here's an update to the old gauge I have. I want something simple and cheap that works. This way, everyone can get one. Check out the gauge and let me know.

Boost controller
OLED 1.3" white
microcontroller based
Mac Solenoid
Air Fuel Ratio 0-5 volts 7.35-22afr input for LC-1
4bar map sensor up to 43PSI onboard
3 button Capacitive touch Menu System
Peak Boost value
Boost Warning Setting
Boost Gain Setting
Boost Spool Setting
LED warning light

http://paulsvang.com/mylife/boost-co...n-1-assembled/

Please give me some feedback on it. Ideas, improvements, what not to do, etc. All criticism welcomed.
Let me know if you're interested.

aphex4000

I don't have any mods that would take advantage of this gauge, but I'm really diggin' all the hard work (hand soldering SMDs is not easy) and craftsmanship. Keep it up!

rdtech

Thanks aphex4000. Its a start. I was thinking about incorporating all sensor readings but that may be another project in itself. Thanks again.

dustin02rsx

Only thing i worry about is response time in a vehicle. What micro controller are you using?

Other than that it looks awesome.

rdtech

dustin02rsx,

Response seems to be fine of course I have not done full testing yet. I have done preliminary work using a microchip but have now started using Atmel 328 but may possibly upgrade to the atmega2560 for more storage/pins. Any suggestions? I'm always open for criticism.