S2000 audio/video systems
#441
I don't think I ever posted photos of my above gas tank Boston GT-40 install here.
4-channel and 2-channel RCAs, as well as twisted-pair speaker wires heading
into the center console:
around the handbrake:
under the rear console:
amp on 1/4" plywood rack:
and installed above gas tank:
4-channel and 2-channel RCAs, as well as twisted-pair speaker wires heading
into the center console:
around the handbrake:
under the rear console:
amp on 1/4" plywood rack:
and installed above gas tank:
#444
Registered User
Join Date: Jan 2007
Location: monterey park CA
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
hey spapdx, first of all your system looks great. haha. but yea what i was wondering was how you got those speakers there behind your set. thats really clean and im interested in maybe puttin sum there myself. a few detailed instructions would be GREAT! haha thanks.
#446
Registered User
Join Date: Jan 2007
Location: Glassboro
Posts: 1,472
Likes: 0
Received 0 Likes
on
0 Posts
#447
Originally Posted by freelivin91,Jan 25 2007, 04:27 PM
My install (done with darkknight and NFR):
There's also an Alpine 9856, but there are 700 pictures of that already. You know what they look like. The Alphasonik components are in the doors, but it just looks stock, so no reason for that picture, either.
There's also an Alpine 9856, but there are 700 pictures of that already. You know what they look like. The Alphasonik components are in the doors, but it just looks stock, so no reason for that picture, either.
#448
Registered User
Join Date: Sep 2006
Location: Long Island, New York
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
The amps are designed so that all the wiring is hidden behind the left side of the faceplate. The internal part of the amp actually ends about an inch and a half before the end of the box you see, so the wires just come through the board and right into the amp without anything being seen.
#449
Registered User
Join Date: Jul 2002
Location: Westport, MA
Posts: 15,719
Likes: 0
Received 0 Likes
on
0 Posts
Been a while since I got most of my stuff in and I never posted pics. Here's a list of the basics and a few pics. Not the best quality pics, sorry
- 1ghz CarPC using RoadRunner in the spare tire area
- Lilliput 7" touchscreen proffesionaly modified for direct sunlight viewing
- Alphasonik PMA640HCA amplifier 160x2 + 825x1 RMS
- Alphasonik PCT6501 componants in the front with tweets flush mounted
- Alphasonik PSW8104J sub dual 4ohm coils wired for 2ohms
Heres the touchscreen monitor:
Heres the first PC I used but it has been replaced by the second one in a nice amp style enclosure:
Here is a shot of the Alpha tweet flushed in the stock AP1 location:
Here are some trunk shots:
Cheers!
- 1ghz CarPC using RoadRunner in the spare tire area
- Lilliput 7" touchscreen proffesionaly modified for direct sunlight viewing
- Alphasonik PMA640HCA amplifier 160x2 + 825x1 RMS
- Alphasonik PCT6501 componants in the front with tweets flush mounted
- Alphasonik PSW8104J sub dual 4ohm coils wired for 2ohms
Heres the touchscreen monitor:
Heres the first PC I used but it has been replaced by the second one in a nice amp style enclosure:
Here is a shot of the Alpha tweet flushed in the stock AP1 location:
Here are some trunk shots:
Cheers!