I know people normally put it in the pocket compartment behind the door panel, but what do you do if it's too large to fit?
Old Speakers: Polk MM6501
New Speakers: Massive Audio CK6

Old crossovers:


New crossovers: (too big for compartment)



Here's where I'm putting it for now...(the compartment is removed, but same spot)


here's how my door looks, nowhere to put it


Is it safe to put it there? Will water leak through to the crossover? It's being held down with industrial strength velco so it's not going anywhere. I'm just scared about rain and water

 

or mount them in the boot on an amp rack and run speaker cable from them to the doors?

 

I just put mine beside the amp in the spare tire spot...figured if I ever got a better amp to use the active crossovers in the amp, it would be a quick fix

 

I am going to make a bracket to hold mine. I will try to post it later. How do the Ck6s sound ? I am going with Morel Maximo 6.5s.

 

I mounted both of my crossovers in the open void behind the seats(inside the vented pannel). I tapped the signal/speaker lines right before the factory speakers lines goes in through kick-pannel/door. Then, I ran new speaker wires through the Door(One for the tweeter and one more for mids on both sides of the car).

 

Heres a Pic, There shouldnt be any water in the doors the bottom will get some water while washing or if drive it in rain.