Gernby alternative?
07-16-2018, 01:51 PM
#1
Gernby alternative?
Does anyone have a recommendation on who to use for an etune besides Gernby? I would love to go through him, but he doesn't seem to be responding
This is for an 08, w/ test pipe and flashpro, otherwise stock.
This is for an 08, w/ test pipe and flashpro, otherwise stock.
The following users liked this post:
limecrush (07-20-2018)
07-17-2018, 05:07 AM
#4
AP1Chief
Just been dealing with him over the past week end and all good done some test pulls he saw the data done tune and uploaded to ecu done some more pulls to gather data and we did this till he and i was happy with how the car was running. cold start and hot start are good WOT a/f ratios all good runs like a dream and better than before. He has also been guiding me through how to turn on and off certain things in my AEM EMS which is awesome
Im still learning with AEM Tuner not Fuel or Ignition as i don't want to mess up the tune but learning how to gather the data, set limits so i get warnings adding switched inputs just stuff like that
so in a short one get onto AP1Chief he the new man on the block
Just been dealing with him over the past week end and all good done some test pulls he saw the data done tune and uploaded to ecu done some more pulls to gather data and we did this till he and i was happy with how the car was running. cold start and hot start are good WOT a/f ratios all good runs like a dream and better than before. He has also been guiding me through how to turn on and off certain things in my AEM EMS which is awesome
Im still learning with AEM Tuner not Fuel or Ignition as i don't want to mess up the tune but learning how to gather the data, set limits so i get warnings adding switched inputs just stuff like that
so in a short one get onto AP1Chief he the new man on the block
The following 2 users liked this post by Mike's:
AP1Chief (07-17-2018),
Langelo DeMysterioso (07-20-2018)
07-20-2018, 04:43 AM
#5
Gernby is still around. He just doesn't spend time on this forum anymore. You can contact him via email. He is doing my tune right now.
He is working on a big project, that sprang from his work on writing his own software to build his Flashpro etunes, and doesn't have a lot of spare time. So he is at times a little slow to respond. But he was very up front and made sure I was ok with that before we started.
He is working on a big project, that sprang from his work on writing his own software to build his Flashpro etunes, and doesn't have a lot of spare time. So he is at times a little slow to respond. But he was very up front and made sure I was ok with that before we started.
The following 2 users liked this post by Car Analogy:
Langelo DeMysterioso (07-20-2018),
limecrush (07-20-2018)
07-23-2018, 12:13 AM
#7
Gernby is still around. He just doesn't spend time on this forum anymore. You can contact him via email. He is doing my tune right now.
He is working on a big project, that sprang from his work on writing his own software to build his Flashpro etunes, and doesn't have a lot of spare time. So he is at times a little slow to respond. But he was very up front and made sure I was ok with that before we started.
He is working on a big project, that sprang from his work on writing his own software to build his Flashpro etunes, and doesn't have a lot of spare time. So he is at times a little slow to respond. But he was very up front and made sure I was ok with that before we started.
Trending Topics
08-04-2018, 12:46 PM
#9
Evans tuning has started doing Etunes. Not to take away from APchief as I have heard nothing but good things from him.
One of the main things to consider is their availability. It REALLY sucks when its hard to get ahold of your tuner to get stuff done..this is especially true if youre doing an etune.
One of the main things to consider is their availability. It REALLY sucks when its hard to get ahold of your tuner to get stuff done..this is especially true if youre doing an etune.
08-04-2018, 03:20 PM
#10
Gernby is still around. He just doesn't spend time on this forum anymore. You can contact him via email. He is doing my tune right now.
He is working on a big project, that sprang from his work on writing his own software to build his Flashpro etunes, and doesn't have a lot of spare time. So he is at times a little slow to respond. But he was very up front and made sure I was ok with that before we started.
He is working on a big project, that sprang from his work on writing his own software to build his Flashpro etunes, and doesn't have a lot of spare time. So he is at times a little slow to respond. But he was very up front and made sure I was ok with that before we started.
I haven't heard back from him yet.