hey guys, i am pieceing together a turbo kit and just need some opinons on what people think and also some suggestions on good turbo manifolds for a 30 or a 35r turbo. my goal is 450whp-500whp. it is my daily driver as well. i would be fine if it made 425whp on pump and 500whp on race gas to be more on the safe side. so far i have a stage 2 puddymod built diff with ap2 lsd.

mod list at the current moment of things i will be getting soon. opinions welcome.

inline pro 3mm headgasket.
arp headstuds or oem studs creotreated.
aem ems series 2.
SPEC clutch stage 2+(430tq)
walbro 255
ID 1000cc injectors.

thats it so far. i would like to get tuning clutch and fuel stuff out of the way first. does this list seem okay so far? thanks guys.

 

or i was just looking at pfab stage 1 kit. how are they kits? are they good for around 450-500whp?

 

I think there is a inline pro kit for under 3k. Just get that.
and your done...don't over think it.

 

I'll let you know shorty

 

SPEC clutches are junk from what I have seen, go with an ACT or Competition

 

hmm. okay, i was either thing comp. or spec. ill check out comps stuff as well.

 

thanks, i made up my mind finally. comp stage 3 ironman. you never know when you might go for more power and i dont want to risk slippage. i just hope this clutch isnt over doing it.

 

It isn't. Most guys I've talked to running that same clutch like it quite a bit. Good luck with the build. Fun stuff.

 

okay, thanks guys.

 

I hate my CC stage4... I've had it for around a year and I hate driving my car because of it..