My buddies Andres and Richie will be doing the install over at RAW. They've done most of the work on my car. They are right around the corner from Cartek. And Adrianne will be doing the tune. Im not sure who's dyno we will use. Either Carteks or theres one in Hallendale my buddy uses.....

 

I believe they are Ferrera

 

And they are compatible with the BC cams?

 

Yup....

 

Make sure your spring's max lift is at least 13mm

 

Great!

 

Are the Supertech's compatible with the Stage 3's?

 

No, not all. Some distributors for supertech items might be giving you a different one which has a max lift of 13mm. I have been selling all my customers a different one with a max lift of 16mm. Sacrifices about 10lbs/mm of seat pressure but you can still rev them very high with the 80lbs/mm. So since you bought it from me, you should be good

 

So I can't install the BC Stage 3 cams with Supertech Valve Springs/Retainers/Seats?

[QUOTE]I have been selling all my customers a different one with a max lift of 16mm.

 

You'll be ok with the ones I sent to you. However for other people I would check with the persons they bought it from as they might not be able to run aftermarket cams.