I'm not sure which direction the tensioner on the SC is supposed to be applied to the belt.

Is it supposed to be pulling the belt towards the passanger side or pushing it towards the driver side?

Heres a picture of what I'm talking about.

 

pic on left but reverse pulley pushes on the smooth side of belt hope that helps

 

Yes first one.

 

First one, nice pic

 

Thanks. Ok I had it installed right. Kpro is showing that I'm going from 8psi down to 7psi after 7k rpm. Slipping?

 

Sounds like slippage to me. The belt should stretch over time so tighten it after a couple pulls.

 

yep, if its accurate data.