dyno numbers to be expected
#1
dyno numbers to be expected
Does anyone know what kind of HARD FACT dyno numbers i could expect on a Dyno Dynamics or Mustang dyno with the following:
full race gt2 kit
aem ems
all components etc etc.
also please list what octane gas. 91 or 93.
THANKS!!
full race gt2 kit
aem ems
all components etc etc.
also please list what octane gas. 91 or 93.
THANKS!!
#2
Registered User
That isn't any information.
5psi or 25psi?? it will make a difference
compression ratio??
Turbo size??
What is a "component"
gas isn't an option 93 octane minimum.
Do a search.. There are hundreds of dyno sheets in this forum.
5psi or 25psi?? it will make a difference
compression ratio??
Turbo size??
What is a "component"
gas isn't an option 93 octane minimum.
Do a search.. There are hundreds of dyno sheets in this forum.
#4
I'm sorry i didn't list the COMPLETE specs..
Model year 2000
13-14psi on a gt3076.. the equivalent to the gt3037 offered by full race
2mm head gasket on the stock top and bottom end.
ARP head studs
fuel pump
injectors
blitz sbsID III EBC
clutch
plugs
AEM EMS
93 is offered on the east coast. Here in california.. we have the worst gas.. pay alot for crappy 91.. so that's what i got.
as far as the search goes, i've already done that. it seems that there is ONE guy who has this kit and posted his numbers.. AND i've already contacted him.
Model year 2000
13-14psi on a gt3076.. the equivalent to the gt3037 offered by full race
2mm head gasket on the stock top and bottom end.
ARP head studs
fuel pump
injectors
blitz sbsID III EBC
clutch
plugs
AEM EMS
93 is offered on the east coast. Here in california.. we have the worst gas.. pay alot for crappy 91.. so that's what i got.
as far as the search goes, i've already done that. it seems that there is ONE guy who has this kit and posted his numbers.. AND i've already contacted him.
#6
Registered User
Join Date: May 2007
Location: Gainesville, FL
Posts: 1,218
Likes: 0
Received 0 Likes
on
0 Posts
congrats, you listed the cartridge when you said gt3076, nothing about compressor housing or turbine housing size or a/r. Hows about some real specs instead of the vague stuff.