Ok i have the EMU hardwired(previous owner) and i check all the connections and it seems to be right. But with the EMU it doesnt read the Water temps correctly. It actually makes the Stock ECU think that its running cool (2 bars Ap1) and the fan wont kick in. The reason why i know this is because i idled the car for 1/2 hour and it was still at two bars so i decided to cut the Knock/water temp wire off of the emu harness and it immediately jumped to 3 bars and fans kicked in. With the car still running i joined to wire back together and it droped down to 2 bars again.

Jumpers 13 and 14 are set to 1-2 (water and air temp). What could be the reason this is happening? my water tag is HN-WT1