So a little back story. Ive been set on a s2000 as my dream weekend warrior car for as long as I can remember. I had a b16 eg6 for 5 years but recently switched to the ep3. Ive been in school for the longest time so this dream had to wait quite a while but Ive finally finished everything so I can now start a ap1 turbo build. I was planning on just saving for a complete car to use for the build but I came across a engine deal I couldn't pass up. Since I have been dieing to start this build I couldn't pass up the chance to start the build earlier. Also managed to get the girlfriend on board by telling her I would stop building the ep3 dd car so that's half the battle of getting this thing started. Ill try and post some pictures of the engine to show what im going to be working with. Found this engine 75% disassembled by a Honda dealership for 200$. The owner had no room to store it and I was more then happy to do so for that price. Keep in mind when viewing these pictures that all of the internals will be pitched to make room for machining and many upgrades

https://www.facebook.com/media/set/?...1&l=1a1dec15e9

that's the link for the pictures

Ill start to post my build list soon.
Thanks for reading!

 

wish i could see the build, good luck, post pics in here

 

Zac, upload/link the pics from one of the ubiquitous photo uploaders (ie. photobucket).

 

Well this weekend I started porting and polishing the head, so far I have half of it finished and am fairly pleased with the turn out. Thankfully this engine only had about 50k on it so the exhaust side wasn't to bad at all. A link to some of the photos is below. I tried to include both the before and after ports in the photos to show the progress. The valvetrain should arrive soon and then Ill try and get it over to the machine shop to be matched up.

https://www.facebook.com/media/set/?...1&l=1a1dec15e9

 

figured out how to get the photos on here, sorry new to this forum haha but here they are. the pictures at the end show before and after while i was doing some of the port work. i have 12 of the valves polished now, one more sit down and it will be wrapped up finally.