High boost; spring vs controller
Registered User
Joined: May 2008
Posts: 3,791
Likes: 1
From: Around
in my experience it seems that with a boost controller you can nicely control boost levels roughly 2X that of your spring rating. so i would use the 7psi for example for boost levels of around 14psi + or - a few psi but definitely not 30psi. at high boost levels the boost controller has a hard time keeping the target boost constant with an under rated spring.
Thats a good rule of thumb, I've seen it as much as 3x depending again on the setup and type of EMS/controller you are using.
Thread
Thread Starter
Forum
Replies
Last Post