it seem nobody have the IQ3

 

Now that I've finally got my setup mounted. I figured I'd post.

Racepak IQ3 Street.

I cut the center reinforcement out of the wiper/turn stalk bulkhead, and grabbed a .5"x1" bar of 6061 and fit in to the opening . Drilled through the bulkhead and into the aluminum mounted boss and tapped for M4x.70. Wheel is a sparco 375 (350mm) for reference. I'm connected to a KPRO V4 ECU with racepak VNET module with a 18" VNET extension cable from module to dash for clearance reasons (stock cluster is behind)





W/O Bezel



W/

 

^Clever! I used an L bracket on the top bolt (back of the IQ3).

 

not a racepak, but i mounted my motec c125 on a sheet of carbon fiber within the stock cluster