How many circles to make it right A/F for 8psi ?
#1
Registered User
Thread Starter
Join Date: Nov 2000
Location: Taipei
Posts: 5,323
Likes: 0
Received 0 Likes
on
0 Posts
How many circles to make it right A/F for 8psi ?
I recently uninstall the RC440 cc injectors and take off the emanage. I am running with stock ECU and stock injector with 8lb boost pulley which make real 7lb boost with the aftercooler. (Comptech setup) Since I got really busy, I didn't have time to do the A/F ratio yet. However, I have make 4 circles clock-wise which is supposed to raise the fuel pressureto make it safe.. I did 6 circles clockwise at the first but my idle is not steady, so, I leave it at 4... ( not sure if it is enough to start with)
However, before I actually got time for the accurate A/F setting. I would like to know what is a good start ?? How many circles you guys usually run to make it at least 12.5 A/F or lower?? I am thinking to run somewhere around 12:1 since the gasoline here is terrible and the driving condition here sucks..
Whoever simply twist the Comptech FPR to run 8psi pulley, please share the info, thanks.
D
However, before I actually got time for the accurate A/F setting. I would like to know what is a good start ?? How many circles you guys usually run to make it at least 12.5 A/F or lower?? I am thinking to run somewhere around 12:1 since the gasoline here is terrible and the driving condition here sucks..
Whoever simply twist the Comptech FPR to run 8psi pulley, please share the info, thanks.
D
Thread
Thread Starter
Forum
Replies
Last Post
nightcrawler7188
S2000 Forced Induction
21
12-28-2007 11:40 PM