I want to build my Comptech setup to get the max power out of it. Trying to see what people have and how they did it. I am now on 6.6 psi with 315 tuned by VAFC. EMS should be in the mail soon and a custom pulley. Planning to get 750cc injectors as well to supply the fuel. Comments, suggestions?

 

13 lbs boost with a Vortech:

 

^^ Supporting mods?

 

I got 294.9whp with 179.9lbs torque with 9psi and all the mods you see below. It hits 9psi at about 8500rpm's and timing is almost maxed. Air/fuels are good. Not sure how people are getting 300+ whp.

 

In my sig on my first post:

Solid Rocket Boosters by ACME (click here)

 

What type of dyno?
Mustang?

 

I am aiming for like 350 with the EMS and 8-9psi. You think its possible? Will a 3" exhaust help?

 

Yes its possible. 3" single exhaust with no resonator and test pipe should help out alot but will be very LOUD! Mine was tuned conservatively on the rich side and I was able to get 350.

 

How big is your 10lb pulley? I want to use the EMS to bump up my redline to 8,500 as well. You thinkg thats a good idea?

 

I see the thread but don't see a mod list. Didn't you change out the crank pulley and stuff?