Neeman77 Turbo Build Thread
03-29-2010, 09:35 PM
#31
Ok sorry for not updating I have been busy with placements and such for school.
Alright well I got the flywheel and clutch on, it is the old one I was using before. OEM AP1 flywheel and Competition Stage 4 6-puck.
Sorry for these crappy pics, I did not have my camera and my cell phone camera is broken, this is the best I could do. I assembled the top end with cams etc.
Got all of the accessories on as well as some other things, engine virtually assembled.
I tapped the EGR ports and used set screws with JB weld on them to seal the holes and eliminate the ports on this head.
Also made myself a little bracket out of aluminum to hold the heater valve out of the way of the manifold/downpipe area.
Not a very clear shot but my ASM overfenders with the extensions I moulded into the AP1 bumper
More updates later!
Thanks for all the kind words
Alright well I got the flywheel and clutch on, it is the old one I was using before. OEM AP1 flywheel and Competition Stage 4 6-puck.
Sorry for these crappy pics, I did not have my camera and my cell phone camera is broken, this is the best I could do. I assembled the top end with cams etc.
Got all of the accessories on as well as some other things, engine virtually assembled.
I tapped the EGR ports and used set screws with JB weld on them to seal the holes and eliminate the ports on this head.
Also made myself a little bracket out of aluminum to hold the heater valve out of the way of the manifold/downpipe area.
Not a very clear shot but my ASM overfenders with the extensions I moulded into the AP1 bumper
More updates later!
Thanks for all the kind words
03-29-2010, 10:56 PM
#32
Very nice man!
Looks like a lot of blood went into putting those cams in. LOL Whats up with all the red markings?
Looks like a lot of blood went into putting those cams in. LOL Whats up with all the red markings?
12-14-2010, 03:39 PM
#34
Well just updating since I will be doing some more minor modifications this year. The car did very well this year putting down 610 whp and 422 ft/lbs tuned by LJ at fullblown motorsports and running a 10.54 @ 135.88 mph backed up by a 10.6 and 10.7. This was all done on the stock transmission. Second gear let go in the tranny before I put it in storage so I swapped in my spare. I will be updating with the new mods over the winter. Here are some highlights from this past summer:
[media]http://www.youtube.com/watch?v=pzaKkEiTsvo [/media]
[media]http://www.youtube.com/watch?v=pzaKkEiTsvo [/media]
12-14-2010, 03:45 PM
#35
12-16-2010, 05:20 PM
#38
Hey Vi3tBoy sorry we didn't end up meeting one another, hopefully next year when im back.
D1sclaimer, I am venting these to atmosphere as I do not get a ton of oil coming of of them as they use the stock baffles. I could easily add a catch can if need be but I would rather do this.
D1sclaimer, I am venting these to atmosphere as I do not get a ton of oil coming of of them as they use the stock baffles. I could easily add a catch can if need be but I would rather do this.
