I'm looking for a oil relocation kit, the one on Full-Race website for 499.00 seem's a little high! I know it uses the stainless lines and AN fitting's but if I was to buy the B&M kit and buy the stainless line and AN fittings on my own it wouldnt be half that cost of the Full-Race. Does anyone see anything wrong with this kit.
http://www.jegs.com/webapp/wcs/stores/serv..._10002_23102_-1

 

should do the job.

 

heard there may be a loss in pwer by adding this. curious is this is true

 

Why would relocation of the oil filter cause a loss in power???

 

woops! sorry...i thought this was about an oil cooler kit.

 

Even still, how would margionally cooler oil affect power?

 

I believe I read it in the fi forum a while back. someone lost power do to the loss in oil ressure or something along those lines. To be honest I still don't believe if it's true or not. as i said i am curious to find out myself.

 

some people were having issues with oil pressure loss with all the lines that went to the oil coolers etc... some had issues getting vtec to engage!

the only part of my UR setup that i would recommend is their oil relocator kit, its located lower on the ground, so the oil doesn't leak everywhere when you change the fiter, and it also keeps the stock oil cooler setup.

 

Alright i'll take a look at the Ultimate Racing kit! Thanks.

 

look at the inline pro kit, made for the s2000 and works very well