Can you adjust the fmu so that it is delivering less fuel? Maybe you have too much fuel pressure and it needs to be backed off. have you removed the map sensor from the TB and cleaned it? If none of these work try removing the fmu and putting the stock fuel pressure regulator on and try running it again.

 

Okay i took off fmu and and checked all sparks. They all getting spark. I will go clean sensor right now.

 

hmm... Still nothing..

 

Well guys no im worried my motor or head is gone.
I did compression test:
1st cylinder: ( closest to front bumper) reading were 114, 115, 110
2nd cylinder: Reading was 64 63 70
3rd and 4th cyclinders i couldnt get reading or they were really low.

I have no idea what to do know. The timing chain looks tight. So im gussing motor went?

 

it will create a little seal between the piston and cylinder, to help bump up the compression to help with ignition.

 

motor needs a rebuild or you need a new motor. cylinders with really really really low compression will not ignite.

 

Good News you guys.... Found the problem!!! For some reason the cam seized.//// Any ideas why??

 

the words good news and cam siezed def should not be in the same sentence.

that is def not good news.

 

 

Nah it is. Just gotta get new cam and the towers that hold it. The valves are undamaged. Better then the actual motor going